DCi 8|600DA

Eight-channel, 600W Power Amplifier with Dante™ Networked Audio, 2/4/8ω and 70V/100V (Now shipping)

The DriveCore Install DA series is a line of premium installation amplifiers with Dante™ networked audio transport that are based upon proprietary DriveCore technology. These amplifiers feature an efficient design with network control/monitoring, high-level DSP with JBL tunings, and 2ω/4ω/8ω/70V/100V direct output compatibility.

- Redundant, independent Dante ports
  • Primary & Secondary
  • Will accept 48khz or 96khz
  • Capable of sending out Dante audio from analog inputs pre/post processing (@ 48kHz)
- Audio Architect Control and Monitoring
- DriveCore Amplifier Technology
- Universal PFC Power Supply
- DSP
  • 48kHz processing
  • 20 Presets
  • Input router
- High, medium, and low priority inputs
  • Input delay up to 2s
  • Input EQ
  • Crossover
  • Output EQ
  • Output Delay up to 100ms
  • LevelMAX limiter
  • Load Monitoring
- Pilot tone
  • Normal
  • Burst
- Continuous Load Monitoring
- Sweep Load Monitoring
  • Channel Auto-Standby
  • Speaker Tunings
- Aux-Port
  • Sleep contact closure
  • Amp Status output
- Removable air filters
- Front panel LED indicators

INTEGRATED DANTE™NETWORKED AUDIO – Simplifies installation by enabling Dante networked audio signals to be sent directly to the amplifier. Provides flexibility of installation options available with our expansive line-up of DriveCore Install amplifiers.

NETWORK CONFIGURATION, MONITORING & CONTROL – Better monitoring, control and audio manipulation with the HiQnet™ protocol over standard TCP/IP network. The HiQnet Audio Architect software allows for remote configuration, monitoring, and control of all aspects of the DCi-DA Series amplifiers.

PROGRAMMABLE GENERAL PURPOSE INPUT/OUTPUT PORT – GPIO ports can be configured in many different ways, such as volume controls, recall presets, or to report errors to third-party control system.

DIGITAL SIGNAL PROCESSING – DSP capabilities include the following:
LevelMAX Limiters
Input/Output EQ
Crossover
Delay
Matrix Router
Speaker Line Monitoring