Crown Audio XLi 2500 Two-channel 750W Power Amplifier
Description
Crown Audio XLi 2500 Two-channel 750W Power Amplifier
The Crown Audio XLi 2500 is a compact, rack-mounted power amplifier that delivers serious output in a 2U footprint. Built for the rigors of touring and live work, this amp runs cool and quiet with efficient forced-air cooling and minimal distortion, making it the dependable backbone for any gigging rig—whether you're powering monitors on a theater stage, backing up main speakers at a festival, or running a permanent installation.
Power Output & Connectivity
The XLi 2500 generates 750W per channel at 4 ohms, 500W per channel at 8 ohms, or 1500W in bridged-mono mode, giving you the headroom to match any speaker load your setup demands. Dual RCA and XLR inputs pair with both Speakon and binding post outputs, ensuring you can integrate seamlessly with touring rigs, house systems, and everything in between.
Audio Performance & Reliability
This amp delivers less than 0.5% THD across the full 20 Hz–20 kHz spectrum with a damping factor exceeding 200 at 8 ohms, keeping your bass tight and your mids and highs crystal clear through long nights of service. Built-in protection circuits guard against shorts, no-load conditions, RF interference, and on/off thumps—critical safeguards for live touring. Signal to Noise Ratio >100 dB (A-weighted) keeps your monitoring and effects clean, even at low levels.
Key Features
- 750W per channel at 4 ohms; 500W per channel at 8 ohms; 1500W bridged-mono at 8 ohms
- Stereo, parallel, and bridge-mono operating modes
- RCA and XLR inputs; Speakon and binding post outputs
- User-selectable input sensitivity: 0.775V or 1.4V
- Frequency response: 20 Hz–20 kHz, +0/–1 dB
- Total Harmonic Distortion <0.5% (20 Hz–20 kHz)
- Signal-to-Noise Ratio >100 dB (A-weighted)
- Damping factor >200 at 8 ohms
- Input impedance: 20 kΩ balanced, 10 kΩ unbalanced
- Class AB circuitry with forced-air cooling
- Power/fault/signal presence/clip LED indicators per channel
- 2U rack format; 19" × 3.5" × 12.4"; 29.7 lbs
Six decades of Crown engineering deliver a power amp built for the road—the XLi 2500 is the go-to choice for musicians and sound engineers who need transparent, rock-solid amplification they can count on night after night.
More Information
| Condition | New |
|---|---|
| Country of Manufacture | China |
Reviews
At a Glance
The Crown Audio XLi 2500 is a compact 2U rack power amp delivering 750W per channel at 4 ohms with transparent, distortion-free amplification and tight bass control—ideal for touring rigs, live venues, and permanent installations where reliability matters. Built with over 60 years of Crown engineering, it runs cool and quiet with minimal noise floor and comprehensive protection circuits, making it a dependable foundation for any professional PA system or monitor rig. Choose it when you need serious, clean watts without coloration, in a format that fits real-world touring and venue setups.
Who This Is For
Great for
- ✓ Live Performance
- ✓ Touring
- ✓ Studio Sessions
- ✓ Gigging
Frequently Asked Questions
What power output do I get at different impedance loads?
The XLi 2500 delivers 750W per channel at 4 ohms, 500W per channel at 8 ohms, or 1500W in bridged-mono mode at 8 ohms. This flexibility lets you match your speaker configurations—whether you're running dual cabinets per side or a single full-range system.
Will this amp color my signal, or is it truly transparent?
The XLi 2500 is engineered for transparent amplification with less than 0.5% THD across the full 20 Hz–20 kHz spectrum, a damping factor exceeding 200, and a noise floor above 100 dB. It reproduces your input signal cleanly and accurately without adding character or distortion.
What connectors does it have, and will it work with my existing setup?
Dual RCA and XLR inputs pair with both Speakon and binding post outputs, ensuring compatibility with virtually any professional PA system, monitor rig, or studio installation. User-selectable input sensitivity (0.775V or 1.4V) allows integration with different mixing consoles and preamps.
How does it handle heat and protection?
The XLi 2500 uses efficient forced-air cooling to run cool and quiet during extended sessions or touring. Built-in protection circuits guard against shorts, no-load conditions, RF interference, and on/off thumps, ensuring reliability in high-demand venues and installations.
What does the 2U rack format mean for my setup?
At 19" × 3.5" × 12.4" and 29.7 lbs, the XLi 2500 fits standard 19-inch racks and takes minimal space—ideal for compact touring rigs, permanently installed systems, and mobile PA setups where footprint matters.