JBL PRX712 12" Two-Way Full-Range Main System/Floor Monitor
JBL PRX712 12" Two-Way Full-Range Main System/Floor Monitor
$849.00
Out of stock
SKU PRX712
Details
More Information
Reviews
JBL PRX712 12" Two-Way Full-Range Main System/Floor Monitor
Specifications:
PRX712 is a compact and versatile speaker in the PRX700 Series. It has been designed to deliver maximum performance for its weight and size as both a stage monitor and a front of house main PA.
Features:- 135 dB peak SPL
- 12" Differential Drive® low-frequency driver for low-distortion and higher SPL
- 1.5" diameter next generation JBL neodymium compression driver
- JBL designed waveguide for accurate coverage
- Efficient Class-D amplifier technology
- Optimized EQ for monitor or front-of-house applications
- DSP input section,crossover,dynamic limiting,component optimization,selectable system EQ
- Line level and direct microphone input capability
- Professional XLR-1/4" combination inputs,RCA inputs,and XLR loop-through
- Multi-angle enclosure for main PA or floor monitor applications
- Integrated 36 mm pole mount socket
- Injection molded handle with backing cup for easy transport
- Integrated M10 suspension points for easy setup
- Lightweight poplar plywood cabinets made structurally sound with tongue and groove joints and protected by JBL’s tour proven DuraFlex™finish.
- Cloth backed,dent-resistant 16 gauge steel grilles
- PRX712 is a compact and versatile speaker in the PRX700 Series. It has been designed to deliver maximum performance for its weight and size as both a stage monitor and a front of house main PA. Two user selectable EQ settings are provided to optimize the system for either application. With a dual socket pole mount the PRX712 is a perfect match with a PRX718XLF subwoofer,offering a high performance self-powered sub/sat system.
- The PRX712 is comprised of a 12" Differential Drive® woofer,a 2408H-1,37.5 mm (1.5 in) annular polymer diaphragm,neodymium compression driver mounted to a 90° by 50° horn,all driven by 1500 watt Class-D digital power amplifier. Sophisticated DSP is at the core of a fully featured input section,providing user selectable system EQ,protection,input sensitivity selection,cross-over functionality,dynamic limiting and discrete component optimization.
- All PRX700 cabinets are built from a combination of 25mm (on the top and bottom for added rigidity) and 18mm,strong,light-weight poplar plywood made structurally sound with tongue and groove joints. All PRX700 Series cabinets are protected by JBL’s tour proven DuraFlex™ finish. Grilles are made from dent-resistant 16 gauge steel and handles are made from light-weight glass-filled nylon for added strength and durability. All M10 suspension points are constructed from 14 gauge steel and have been tested with a yield-strength of 1000 lbs. each.
- The amplifier input panel offers XLR or ¼ inch jack compatibility and a sensitivity switch provides extra flexibility,making it possible to connect literally any sound source without using a mixer. Signal present and limiter lights indicate the system status and assist in setting the optimum level via the level control knob
Specifications:
- Power Rating: 1500 W
- AC Power Input: 100V - 240V~ 50/60 Hz
- Frequency Range (-10 dB): Monitor: 44.8 Hz – 19.6 kHz / Main: 44.8 Hz - 19.6 kHz
- Frequency Response (±3 dB): Monitor: 56.5 Hz – 17.7 kHz / Main: 55.7 Hz – 18.2 kHz
- Coverage Pattern: 90° x 50° nominal
- Directivity Index (DI): 10.2 dB
- Directivity Factor (Q): 10.4
- Crossover Frequency: 1.8 kHz
- Maximum SPL: Normal: 135 dB / Boost: 135 dB
- Signal indicators:
- Limit: Yellow LED indicates peak output has been reached and dsp limiter is acting
- Signal: Green LED indicates signal present
- Power/Standby: Blue indicates system has power and ready to pass audio,Red indicates system has power but is in a power saving mode and will not pass audio.
- Dynamic Control (Input): dbx Type IV™ limiter circuit
- Input Impedance: 20K Ohms (balanced),10K Ohms (Unbalanced)
- LF Driver: 1 x JBL 272G 305mm (12 in) woofer
- HF Driver: 1 x JBL 2408H-2 37.5 mm (1.5 in) annular polymer diaphragm,neodymium compression driver
- Enclosure: Asymmetrical,18 mm,plywood
- Suspension/Mounting: Dual 36 mm pole socket,12 x M10 Suspension Points
- Transport: 1 x injection molded handles with backing cup
- Finish: Obsidian DuraFlex™ finish
- Grille: Powder coated,Obsidian,16 gauge perforated steel with acoustical transparent black cloth backing.
- Input Connectors: 2 x Balanced XLR / 1/4 inch input,2 x unbalanced RCA input
- Output Connectors: 1 male XLR balanced output.
- Dimensions (H x W x D): 612.394 mm x 384.556 mm x 341.376 mm (24.11 in x 15.14 in x 13.44 in)
- Net Weight: 19.4 kg (42.5 lb.)
Condition | New |
---|---|
Country of Manufacture | China |
{{title}}
{{{detail}}}
No reviews yet ... Have an opinion? Help others decide. Share your knowledge about this product by submitting a review.
{{/items}} {{#previousPage}} Previous Page {{/previousPage}} {{#load-more-src}} Next Page {{/load-more-src}}
★★★★★
★★★★★