DCI4X300DA-U-USFX-B vs DCI4X300N-U-USFX — Compare

Crown DCI4X300DA DCI4X300 Dante B-Stock vs Crown DCI4X300N DCI4X300 Network

The DCI4X300DA uses Dante networking (AES67-enabled, 16x16 channels at 24/48/96kHz) for modern standards-based audio distribution, while the DCI4X300N uses HiQnet over TCP/IP with BLU-Link digital transport for legacy/proprietary integration. Choose the Dante model for new installations requiring AES67 interoperability; choose the HiQnet model if your existing infrastructure already uses HiQnet control systems.

No sales tax on orders shipped outside California — total cost beats national retailers that charge sales tax in nearly every state.

Crown DCI4X300DA DCI4X300 Dante B-Stock

$3,100.80
View Crown DCI4X300DA DCI4X300 Dante B-Stock

Crown DCI4X300N DCI4X300 Network

$3,876.00
View Crown DCI4X300N DCI4X300 Network

Specs side by side

Crown DCI4X300DA DCI4X300 Dante B-StockCrown DCI4X300N DCI4X300 Network
Price$3,100.80$3,876.00
BrandCrownCrown
Power300W @ 4Ω300W @ 4Ω
Channels44
Install TypeInstalledInstalled
ConditionRefurbishedNew

Why choose Crown DCI4X300DA DCI4X300 Dante B-Stock

  • ✓ Native Dante audio networking with AES67 compatibility for standards-based multi-channel distribution
  • ✓ 16x16 channel Dante capacity over single Ethernet connection eliminates analog cabling
  • ✓ Higher future-proofing through industry-standard Dante protocol adoption
  • ✓ Same 300W per channel, 1200W total output with >1000 damping factor and 0.35% THD

Why choose Crown DCI4X300N DCI4X300 Network

  • ✓ HiQnet protocol with TCP/IP provides proven remote monitoring in established installed systems
  • ✓ Programmable GPIO ports for direct third-party control system and automation integration
  • ✓ BLU-Link digital audio transport as alternative to Dante for specific workflow needs
  • ✓ Simplified architecture for venues already standardized on HiQnet-based infrastructure
Bottom line: Select the DCI4X300DA if designing new networked installations or requiring AES67 multi-vendor interoperability; select the DCI4X300N if integrating into existing HiQnet ecosystems or prioritizing GPIO-based automation with proprietary control platforms.

Frequently asked questions

What networking protocol does each amplifier use?

The DCI4X300DA uses Dante audio networking with AES67 standards compliance, supporting 16x16 channels at up to 96kHz. The DCI4X300N uses HiQnet over TCP/IP with BLU-Link digital audio transport for control and signal routing.

Are the amplifier outputs and power specs identical?

Yes—both deliver 300W per channel at 4 ohms, 1200W total RMS output across four channels, with identical damping factor and THD performance. Both support 4Ω, 8Ω, 70V, and 100V loads.

Which is better for a new church or venue installation?

The DCI4X300DA is recommended for new builds because Dante is becoming the industry standard and allows easier future expansion. The DCI4X300N suits existing venues already running HiQnet control systems, as it integrates directly without gateway devices.

Do both have onboard DSP?

Yes—both include parametric EQ, delay, routing, and limiting. The DCI4X300DA specifically lists levelMAX limiters, crossover, and matrix routing; the DCI4X300N emphasizes equalization, delay, and routing for simplified architecture.

✨
🎸

Welcome! Before we chat…

Drop your name and email so we can follow up if you reach us after hours.

We never share your info.

✨
🟢 Specialist connected