DCI4X300DA-U-USFX-B vs NCDI4X600BL-U-US — Compare

Crown DCI4X300DA DCI4X300 Dante B-Stock vs Crown CDi4x600BL 4x600 Power Amplifier with BLU link

The DCI4X300DA prioritizes networked audio distribution with Dante connectivity (16x16 channels over Ethernet), while the CDi4x600BL delivers double the per-channel wattage (600W vs 300W) with BLU Link control for simpler, more compact installations. Choose the DCI4X300DA for complex multi-channel networked systems; choose the CDi4x600BL for high-power applications requiring fewer channels with easier setup.

No sales tax on orders shipped outside California — total cost beats national retailers that charge sales tax in nearly every state.

Crown DCI4X300DA DCI4X300 Dante B-Stock

$3,100.80
View Crown DCI4X300DA DCI4X300 Dante B-Stock

Crown CDi4x600BL 4x600 Power Amplifier with BLU link

$4,527.00
View Crown CDi4x600BL 4x600 Power Amplifier with BLU link

Specs side by side

Crown DCI4X300DA DCI4X300 Dante B-StockCrown CDi4x600BL 4x600 Power Amplifier with BLU link
Price$3,100.80$4,527.00
BrandCrownCrown
Power300W @ 4Ω4 x 600W
Channels44
Install TypeInstalledInstalled
ConditionRefurbishedNew

Why choose Crown DCI4X300DA DCI4X300 Dante B-Stock

  • ✓ Native Dante networking eliminates analog audio cables in multi-channel systems
  • ✓ 16x16 channel capacity supports large distributed installations
  • ✓ Onboard DSP with matrix routing for complex signal management
  • ✓ AES67 standards compliance for interoperability

Why choose Crown CDi4x600BL 4x600 Power Amplifier with BLU link

  • ✓ 600W per channel—double the power of the DCI4X300DA
  • ✓ Simpler BLU Link networking for straightforward remote control
  • ✓ Direct 100Vrms capability without transformer requirements
  • ✓ More compact form factor for installations with fewer channels needed
Bottom line: Select the DCI4X300DA if your system needs multi-channel Dante distribution and advanced DSP routing across many zones. Select the CDi4x600BL if you need maximum power per channel and simpler networked control for four-channel or fewer applications.

Frequently asked questions

Which is better for a large distributed audio system with many zones?

The DCI4X300DA excels here with its 16x16 Dante capability and onboard matrix routing, allowing you to manage many audio sources and zones over a single Ethernet line without analog cabling complexity.

Which amplifier has more raw power?

The CDi4x600BL delivers 600W per channel versus the DCI4X300DA's 300W per channel. Choose the CDi4x600BL if you need to drive demanding loudspeaker loads or cover greater distances with fewer amplifiers.

What's the difference between Dante and BLU Link?

Dante is an open-standard audio-over-Ethernet protocol supporting 16x16 channels; BLU Link is Crown's proprietary networking solution designed for simpler, four-channel setups. Dante scales better for complex systems, while BLU Link is more straightforward for basic remote control.

Can both handle 70V and 100V constant-voltage systems?

Both amplifiers accommodate 70V and 100V loads. The CDi4x600BL can drive 100Vrms directly without a transformer, while the DCI4X300DA requires verification of transformer requirements for your specific distributed setup.

✨
🎸

Welcome! Before we chat…

Drop your name and email so we can follow up if you reach us after hours.

We never share your info.

✨
🟢 Specialist connected