Crown DCI4X1250DA DCI4X1250 Dante
Description
Crown DCI4X1250DA DCI4X1250 Dante
The Crown DCI4X1250DA is a professional networked power amplifier engineered for live sound venues, touring productions, and installed systems where reliability and remote control are non-negotiable. This 4-channel amp combines serious analog amplification with Dante networking, letting your sound crew manage processing and levels from FOH instead of running to the amp rack between sets.
Power & Load Flexibility
Four channels of 1250W @ 4Ω provide the headroom needed to drive speaker arrays across standard impedances and constant-voltage formats. The DCI4X1250DA accepts 2Ω, 4Ω, 8Ω, 16Ω, 70V, and 100V loads, eliminating the need for multiple amplifiers when working with mixed speaker systems or transitioning between venues with different speaker configurations.
Networking & Remote Management
Dante and AES67 networked audio integrate seamlessly into modern digital audio systems, while redundant independent Dante ports (Primary and Secondary) keep signal flowing in critical live applications. On-board DSP with 20 presets, programmable GPIO ports, and network control let your engineer manage processing, delay, and volume from a central control point—no walking the amp rack to tweak levels or recall settings.
Key Features
- 4-channel 1250W @ 4Ω power amplifier
- Speaker load support: 2Ω, 4Ω, 8Ω, 16Ω, 70V, and 100V
- Dante and AES67 networked audio capability
- Redundant, independent Dante/AES67 ports accepting 48kHz or 96kHz
- High-powered DSP with JBL speaker tunings
- 48kHz DSP processing with 20 presets
- Input delay up to 2 seconds and output delay up to 100ms
- Programmable GPIO ports for volume control, preset recall, and error reporting
- Universal PFC power supply for global compatibility
- Continuously variable speed forced air cooling with front-to-back airflow
- EN 54-16 compliant for life safety systems
The DCI4X1250DA delivers the raw amplification, networked flexibility, and safety certification your production demands—whether you're running permanent installations or touring between venues.
More Information
| Condition | New |
|---|
Reviews
At a Glance
The Crown DCI4X1250DA is a 4-channel networked power amplifier delivering 1250W per channel with Dante audio streaming, built for large-venue PA systems, touring rigs, and fixed installations that require remote control and bulletproof reliability. Its flexible load support (2Ω to 100V) and redundant Dante ports eliminate the need to swap amps between venues or worry about network dropouts during a critical show. Choose this if you run sound for larger rooms, festivals, or install systems where centralized control and EN 54-16 safety certification matter.
Who This Is For
Great for
- ✓ Live Performance
- ✓ Fixed Installation
- ✓ Touring
- ✓ Large Venue PA
Not the best pick for
- – Home Recording
- – Practice
- – Small Venue Gigging
Skill level: Professional
Frequently Asked Questions
What makes the DCI4X1250DA suitable for touring versus just fixed installations?
Redundant independent Dante ports ensure signal continuity even if one network connection fails during a show, and its support for 2Ω to 100V loads means you can adapt to different venue speaker systems without carrying multiple amplifiers. The universal PFC power supply also works globally, eliminating the need for step-down converters when touring internationally.
Can I control this amplifier remotely, or do I have to adjust it physically?
On-board DSP with 20 presets, programmable GPIO ports, and full network control let you manage processing, delay, and volume from a central control point rather than walking to the amp location. Input delay up to 2 seconds and output delay up to 100ms provide additional timing flexibility for synchronized multi-zone installations.
What speaker loads does this amplifier support?
The DCI4X1250DA accepts 2Ω, 4Ω, 8Ω, 16Ω, 70V, and 100V loads, allowing you to drive passive speakers, constant-voltage systems, and mixed impedance rigs without requiring separate amplifiers or transformers.
Is this amplifier certified for life safety and emergency systems?
Yes, the DCI4X1250DA is EN 54-16 compliant, making it suitable for emergency voice-alarm systems and other safety-critical fixed installations.
What networking options does this amp provide?
Dante and AES67 networked audio capability with redundant, independent Dante/AES67 ports allow integration into modern digital infrastructure, accepting audio at 48kHz or 96kHz sample rates.