Crown DCI2X600N DCI2X600 Network
- Brand new in original box
- Full Crown manufacturer's warranty
- Free shipping in the continental US
In stock
Only 1 left
- SKU
- DCI2X600N-U-USFX
Description
Crown DCI2X600N DCI2X600 Network Power Amplifier
The Crown DCI2X600N is a compact, networked power amplifier built for sound operators and system managers who need to monitor and control amplification remotely. Its 2 RU rackmount footprint and 18.8 lb weight slip easily into existing rigs, while the onboard DSP and HiQnet connectivity let you manage the amp as an intelligent, centrally controlled device from anywhere on the network—no physical rewiring or dedicated control lines required.
Power & Performance
Delivering 600W per channel across 2, 4, 8, or 16 ohm loads—as well as 70V and 100V distributed systems—the DCI2X600N scales to match both small venues and larger installations. Thermal dissipation peaks at 549 BTU/hr, allowing sustained operation in confined spaces without active cooling requirements.
Network Control & DSP Processing
Real-time monitoring and configuration happen over standard TCP/IP via HiQnet protocol, letting you adjust the amplifier from a control station or laptop without leaving the front-of-house position. The integrated DSP engine handles crossovers, LevelMAX limiting, parametric EQ, delay, matrix mixing, and speaker line monitoring—all configurable on the fly and storable in presets for quick redeployment across multiple gigs and venues.
Key Features
- 600W output per channel at 2, 4, 8, or 16 ohms
- 600W output per channel at 70V and 100V Vrms
- 2 RU rackmount form factor
- Weight: 18.8 lbs / 8.5 kg
- 15 LED indicators for Bridged Mode, Clip, Fault, Level, Signal, Standby, and Thermal status
- Thermal dissipation: 549 BTU/hr maximum
- BLU Link digital audio transport with RJ45 rear-panel connectors
- Balanced analog inputs
- Onboard DSP with LevelMAX limiters, EQ, delay, matrix mixer, and speaker line monitoring
- HiQnet protocol over TCP/IP for network monitoring and control
- Programmable GPIO ports
- EN 54-16 compliant for life safety applications
The DCI2X600N combines professional-grade amplification with network-based remote control, making it reliable choice for touring rigs, permanent venue installations, and any live sound setup where you need hands-on power management from a distance.
More Information
| Condition | New |
|---|
Reviews
At a Glance
The Crown DCI2X600N is a compact 2-channel networked power amplifier delivering 600W per channel into any standard load (2–16 ohms, 70V, or 100V), built for installed sound systems and touring rigs that demand remote monitoring and DSP processing over Ethernet. Choose it when you need professional-grade reliability, integrated limiting and EQ, and the ability to manage your amp from a control room or venue network rather than running cables back to the rack. Its thermal stability and HiQnet connectivity make it ideal for permanent installations, rental fleets, and large-scale live events where consistency and troubleshooting from a distance save time and reduce tech crew overhead.
Who This Is For
Great for
- ✓ Live Performance
- ✓ Studio Sessions
- ✓ Installed Sound Systems
Not the best pick for
- – Home Recording
- – Practice
Skill level: Professional
Frequently Asked Questions
What loads and voltage configurations does the DCI2X600N support?
The DCI2X600N delivers 600W per channel across 2, 4, 8, and 16 ohm loads, as well as 70V and 100V distributed systems, making it compatible with both conventional speaker cabinets and installed sound infrastructure.
How do I control and monitor the amplifier remotely?
The DCI2X600N uses HiQnet protocol over standard TCP/IP Ethernet to enable real-time monitoring, remote configuration, and preset storage from any networked control interface. No dedicated control lines or physical rack access are required.
What DSP processing and limiting features are included?
Onboard DSP includes LevelMAX limiters, parametric EQ, crossovers, delay, matrix mixing, and speaker line monitoring—all programmable via HiQnet and storable in presets for rapid deployment across venues.
Is the DCI2X600N suitable for permanent installation?
Yes. It is EN 54-16 compliant for life safety applications and designed specifically for installed sound systems. Its 2 RU rackmount form factor, low weight (18.8 lbs), and efficient thermal dissipation (549 BTU/hr maximum) allow it to integrate into confined spaces without active cooling.
How does the DCI2X600N compare to passive power amplifiers?
Unlike passive amps, the DCI2X600N combines amplification with integrated DSP processing, LevelMAX limiting, speaker monitoring, and network control—eliminating the need for external processors, signal conditioners, and physical access to the rack for adjustments.
Compare With
Similar Gear
Complete the Rig
Gear that pairs well with this.
✨ For You
Based on what you've been looking at.