Crown DCI8X300 DCI8X300 Analog
Description
Crown DCI8X300 8-Channel Analog Amplifier
The Crown DCI8X300 is a compact, professional-grade 8-channel amplifier built for live sound engineers and touring crews who need reliable multi-channel power in a tight footprint. Its 2 RU form factor packs substantial power density without eating up valuable rack real estate, making it essential for anyone running distributed speaker systems or managing complex venue installs. Built on Crown's proven DriveCore Class-D architecture, this amp combines efficiency with the rock-solid dependability that touring rigs demand.
Power Delivery & Impedance Flexibility
Each of the eight channels produces 300 watts and operates across multiple impedance configurations—2, 4, 8, and 16 ohms—plus 70V and 100V constant-voltage modes, letting you adapt to virtually any speaker load or distributed system setup. Channels are bridgeable for applications requiring higher single-channel power output, giving you tactical flexibility when system demands change mid-tour or mid-install.
Control & Efficiency
Independent channel attenuators provide 0 to -95 dB of level control per channel, letting you dial in precise gain staging without patching external mixing gear into your signal path. The rear-panel DIP switch configuration allows per-channel selection of high or low impedance output, eliminating guesswork in multi-zone setups and reducing load-in time. An advanced PFC universal power supply accepts 100–240 VAC (50/60 Hz, ±10%), while the auto-standby Powersave mode consumes less than 1W after 30 minutes of inactivity, cutting power draw on permanently installed or long-running systems.
Key Features
- 8-channel configuration with 300 watts per channel output
- Class-D amplification with Crown DriveCore PWM technology
- Independent per-channel attenuators with 0 to -95 dB range
- Compatible with 2, 4, 8, and 16 ohm impedances
- 70V and 100V constant-voltage operation modes
- Bridgeable channels for higher single-channel power
- Rear-panel DIP switches for high/low impedance selection per channel
- Advanced PFC universal power supply, 100–240 VAC, 50/60 Hz (±10%)
- Auto-standby Powersave mode consuming less than 1W after 30 minutes inactivity
- 2 Rack Unit form factor
The DCI8X300 delivers the efficiency, multi-impedance flexibility, and compact footprint required for touring venues and installed sound where eight independent amplified channels must coexist within strict space and power budgets.
More Information
| Condition | New |
|---|
Reviews
At a Glance
The Crown DCI8X300 is a compact 8-channel amplifier delivering 300 watts per channel in just 2 rack units, built on Crown's proven DriveCore Class-D architecture for efficient, reliable power. Sound technicians and touring engineers rely on it for multi-zone live systems and installed audio because it bridges 2–16 ohm, 70V, and 100V loads without flinching, with per-channel level control and a low thermal footprint that fits tight racks and road cases. Choose it when you need bulletproof amplification density and transparent power delivery across whatever speaker configuration the venue throws at you.
Who This Is For
Great for
- ✓ Live Performance
- ✓ Installed Audio Systems
- ✓ Multi-Zone Distribution
- ✓ Touring
Not the best pick for
- – Home Recording
- – Practice
Skill level: Professional
Frequently Asked Questions
What impedance loads does the DCI8X300 support?
All eight channels operate across 2, 4, 8, and 16 ohm loads, as well as 70V and 100V constant-voltage modes. Channels are also bridgeable if you need higher single-channel power, giving you tactical flexibility for virtually any speaker configuration.
How much power do I get per channel?
Each of the eight channels delivers 300 watts. When you bridge channels for higher output, you can combine that power for applications requiring fewer, more powerful amplified lines.
Can I control the gain on each channel independently?
Yes, the DCI8X300 includes independent per-channel attenuators with 0 to -95 dB of level control, allowing precise gain staging without requiring an external mixing console. Rear-panel DIP switches also let you select high or low impedance output per channel.
How does the DCI8X300 handle heat and power efficiency?
Its Class-D amplification and Crown DriveCore PWM technology create a low thermal footprint, crucial for compact rack installations. An advanced PFC universal power supply (100–240 VAC, 50/60 Hz) and auto-standby Powersave mode consuming less than 1W after 30 minutes of inactivity keep energy overhead minimal in permanently installed systems.
What form factor does it have?
The DCI8X300 occupies just 2 rack units, delivering substantial power density without consuming excessive space—ideal for touring rigs and rack systems with tight real estate.