EMG 40J 5-String Active Bass Pickup in Black
Share
- Brand new in original box
- Full EMG manufacturer's warranty
- Free shipping in the continental US
In stock
- SKU
- EMG519
Description
EMG 40J 5-String Active Bass Pickup in Black
The EMG 40J is a compact active pickup engineered for modern 5-string bass players who demand articulate, high-output performance without sacrificing clarity. Its single-coil design delivers punchy midrange and controlled low end, cutting through a live mix with authority while maintaining definition in studio recordings. The solderless wiring system and included prewired control set make for quick, reliable installation on the road or in the shop.
Tone & Output Characteristics
This active design produces a peak output voltage of 1.10V with a resonant frequency of 4.8 kHz, yielding a focused, articulate response that sits well in ensemble playing and broadcast scenarios. The 0.8V RMS output and -91 dBV output noise specification ensure clean signal transmission to your amplifier with minimal noise floor intrusion, while the 10 kΩ output impedance maintains compatibility with standard bass rig inputs and front-of-house mixers.
Installation & Live Reliability
Built for working musicians, the EMG 40J measures 102.0mm (4.00") in length and 38.1mm (1.50") in width, fitting standard 5-string bass routes with a maximum recommended string width of 76.2mm (3.00") and 95.3mm screw spacing. The solderless Quik-Connect cable system and included prewired volume/tone control set, output jack, battery clip, and adjustment screws mean you can swap or install this pickup without extended downtime, and the robust active electronics deliver consistent performance through long touring schedules.
Key Features
- Active pickup designed for 5-string electric bass
- Single coil design with ceramic magnet
- Length: 102.0mm (4.00"), Width: 38.1mm (1.50")
- Maximum recommended string width: 76.2mm (3.00")
- Mounting screw spacing: 95.3mm
- Peak output voltage: 1.10V; RMS output voltage: 0.8V
- Resonant frequency: 4.8 kHz; Output impedance: 10 kΩ
- Output noise: -91 dBV; Current @ 9V: 80 µA
- Battery life: 3000 hours; Maximum supply voltage: 27 VDC
- Solderless connections with Quik-Connect cable
- Includes prewired volume/tone control set, output jack, battery clip set, and adjustment screws
- Made in USA; Color: Black
The EMG 40J combines straightforward installation, robust active electronics, and proven EMG reliability into a pickup that works hard without demanding complicated setup procedures.
More Information
| Condition | New |
|---|
Reviews
At a Glance
The EMG 40J is a compact active 5-string bass pickup built for modern funk, rock, and studio work—delivering punchy midrange, controlled lows, and articulate high-output tone without the noise floor issues of passive designs. Its solderless Quik-Connect system and included prewired controls make retrofit installation straightforward, so you can swap it into a standard 5-string route and get playing fast. Choose it if you need focused, cutting tone that sits tight in a mix and holds its clarity through a full gig or session.
Who This Is For
| Best suited for | Funk, Modern Rock, Studio Sessions, Home Recording |
|---|---|
| Tonal character | Articulate, high output, punchy midrange, controlled low end, clean signal |
| Less specialized for | Traditional Jazz, Vintage Tone Aesthetics (it will do it; instruments voiced for that style do it more easily) |
| Skill level | Intermediate / Advanced / Professional |
Frequently Asked Questions
What skill level do I need to install the EMG 40J?
The pickup is designed for intermediate to advanced players and technicians. The solderless Quik-Connect cable system and included prewired volume/tone control set, output jack, and battery clip eliminate traditional soldering, but you'll still need a standard 5-string bass route with 95.3mm screw spacing and a maximum string width of 76.2mm to fit it properly.
How does this pickup handle low-end response?
The 40J features controlled low end and a resonant frequency of 4.8 kHz, which emphasizes midrange punch and clarity over boomy bass. This tuning works well in tight studio mixes and live settings where you need definition, though it is not designed to deliver traditional jazz or vintage warm tones.
What output and noise specs should I expect?
Peak output voltage is 1.10V with 0.8V RMS; output noise measures -91 dBV, ensuring minimal noise floor when feeding your amp or interface. Current draw at 9V is 80 µA, and battery life is rated at 3000 hours.
Is the EMG 40J compatible with my bass?
It fits standard 5-string bass pickups routes with 95.3mm screw spacing, a maximum string width of 76.2mm, and is 102.0mm long by 38.1mm wide. Verify your bass matches these dimensions before ordering.
What's included in the box?
The package includes the active pickup, solderless Quik-Connect cable, prewired volume/tone control set, output jack, battery clip set, and adjustment screws. No soldering iron needed.
Do I pay sales tax on this order?
Sales tax is collected only on orders shipped to California; orders shipped to any other US state are not charged sales tax at checkout when you buy direct from our website. Marketplaces collect sales tax as the facilitator in most states, so the same listed price can cost more there. Buyers remain responsible for any use tax their state applies. Free US shipping and 30-day returns are included.
Compare With
Similar Gear
Complete the Rig
Gear that pairs well with this.
✨ For You
Based on what you've been looking at.