EMG 81X Long Shaft Active Humbucker Pickup in Black Chrome
- Brand new in original box
- Full EMG manufacturer's warranty
- Free shipping in the continental US
In stock
- SKU
- EMG4858
Description
EMG 81X Long Shaft Active Humbucker Pickup in Black Chrome
The EMG 81X is a high-output active humbucker built for aggressive, articulate tones with a noise floor tight enough for any stage. Its compact preamp circuitry and low-impedance design deliver tight low-end definition and cutting midrange presence, making it dependable for modern rock, metal, and hard-playing styles. The long-shaft configuration accommodates deeper cavities and non-standard mounting applications, giving you flexibility across different guitar builds and retrofit scenarios.
Tone & Output Performance
This pickup generates 4.00V string output and 8.50V strum output with a 1.72 kHz resonant frequency, producing punchy articulation and controlled sustain across the fretboard. The -105 dBV noise floor at 60Hz ensures clean, hum-free operation even at high gain settings—critical for live amplification and recording without unwanted artifacts creeping into your mix.
Electronics & Power Management
Powered by a single 9V battery with approximately 3000 hours of battery life, the X-Series preamp operates at just 80 microamps current draw—keeping battery drain minimal during tours and extended sets. The EMG Solderless Quick-Connect system with 3-pin header makes field swaps and emergency replacements straightforward without tools or soldering iron.
Key Features
- Active dual-coil humbucker with X-Series preamp
- Ceramic and steel magnet construction
- Steel rail pole pieces with close aperture coils
- 4.00V string output voltage
- 8.50V strum output voltage
- 1.72 kHz resonant frequency
- -105 dBV output noise (60Hz)
- 2.00 kΩ output impedance
- 80 microamps current draw at 9V
- 3000-hour battery life per 9V cell
- EMG Solderless Quick-Connect wiring system
- Long-shaft configuration for deep or recessed cavities
The 81X Long Shaft combines EMG's proven active platform with extended reach, delivering defined, noise-free output that holds up night after night on stage and in the studio.
More Information
| Condition | New |
|---|---|
| Finish | Black Chrome |
Reviews
At a Glance
The EMG 81X Long Shaft is a high-output active humbucker built for aggressive modern rock and metal, delivering tight low-end punch, cutting midrange clarity, and virtually silent operation even at high gain. Its long-shaft design fits deeper pickup cavities and non-standard routes, while the quick-connect wiring and 3000-hour battery life make it road-ready for gigging and studio sessions. Choose it when you need articulate, noise-free tone that cuts through a live mix without feedback or hum.
Who This Is For
| Best suited for | Metal, Hard Rock, Progressive, Drop Tunings, Live Performance |
|---|---|
| Tonal character | Tight low end, cutting midrange, high output, articulate, minimal noise |
| Less specialized for | Jazz, Blues, Folk (it will do it; instruments voiced for that style do it more easily) |
| Skill level | Intermediate / Advanced / Professional |
Frequently Asked Questions
What does the long-shaft configuration do, and do I need it?
The long-shaft design accommodates deeper pickup cavities and non-standard mounting applications commonly found on certain guitar models. Use it if your guitar has a recessed or deeper-than-standard pickup route; standard-shaft pickups may not seat properly in those cavities.
How long does the battery last?
A single 9V battery provides approximately 3000 hours of playing time, or roughly 4–5 months of regular use. The pickup draws only 80 microamps, minimizing drain between battery changes.
Is this pickup suitable for blues or jazz?
No. The 81X is optimized for metal, hard rock, and progressive styles with its high output and articulate, aggressive tone profile. Jazz and blues players typically prefer lower-output, warmer-sounding pickups.
What is the noise floor, and why does it matter?
The -105 dBV noise floor at 60Hz is extremely clean, meaning the pickup produces virtually no hum or buzz even at high gain settings. This matters for live performance and recording because you can push gain hard without picking up unwanted background noise or hum artifacts.
How is this pickup installed?
The EMG Solderless Quick-Connect system uses a 3-pin header that connects without soldering, allowing tool-free installation and easy component swaps. No special wiring knowledge required.
Do I pay sales tax on this order?
Sales tax is collected only on orders shipped to California; orders shipped to any other US state are not charged sales tax at checkout when you buy direct from our website. Marketplaces collect sales tax as the facilitator in most states, so the same listed price can cost more there. Buyers remain responsible for any use tax their state applies. Free US shipping and 30-day returns are included.
Compare With
✨ For You
Based on what you've been looking at.