EMG 89 Long Shaft Active Humbucker Pickup in Black Chrome
Share
- Brand new in original box
- Full EMG manufacturer's warranty
- Free shipping in the continental US
In stock
- SKU
- EMG6203
Description
EMG 89 Long Shaft Active Humbucker Pickup in Black Chrome
The EMG 89 is a versatile active humbucker that bridges single-coil articulation and dual-coil power through its unique dual-mode design. This long shaft variant accommodates guitars with deeper pickup cavities while delivering the tight, controlled aggression and clarity that active EMG electronics are known for. The black chrome finish provides a sleek, professional aesthetic that complements modern and classic guitar designs alike.
Dual-Mode Performance & Output
Switch between Alnico-loaded single-coil mode for crisp, articulate highs and dual-coil mode for thick, compressed output—all without rewiring. Single-coil mode yields 0.6V RMS output with a 3.75 kHz resonant frequency, while dual-coil mode pushes 1.0V RMS at 2.55 kHz, giving you tonal flexibility from bright definition to aggressive sustain that cuts through a live mix. The output impedance of 10kOhms ensures clean integration with standard guitar electronics and minimal signal loss into your amp or pedalboard.
Active Electronics & On-Stage Reliability
Powered by a single 9-volt battery drawing only 160 microamps at 9V, this pickup delivers up to a year of battery life under typical daily gigging and rehearsal schedules. The solderless connection system simplifies installation and reduces wiring errors, while the included 25k sound potentiometer and 25k push/pull potentiometer provide intuitive tone shaping and mode switching without modification. Active EMG design means consistent output and reliability night after night on stage.
Key Features
- Dual-mode design: Alnico-loaded stacked single-coil and dual-coil configurations in one pickup
- Alnico V magnet for warm, focused tone
- Long shaft design (installation depth 22.9 mm) for deep-cavity guitar compatibility
- Single-coil mode: 0.6V RMS output, 3.75 kHz resonant frequency, -94 dBV noise floor
- Dual-coil mode: 1.0V RMS output, 2.55 kHz resonant frequency, -99 dBV noise floor
- Peak output voltage: 1.75V (dual-coil mode), 0.85V (single-coil mode)
- Output impedance: 10kOhms
- 9-volt battery operation at 160 microamps; up to one year typical battery life
- Dimensions: 69.9 x 38.1 mm mounting footprint, 78.5 mm screw spacing
- Solderless connection system with included 25k sound and push/pull potentiometers, battery bus, stereo output jack, and mounting hardware
- Black chrome finish
The EMG 89 delivers serious tonal range and rock-solid active electronics in a format that fits deep-cavity builds without compromise—proven dependability for gigging players and collectors alike.
More Information
| Condition | New |
|---|
Reviews
At a Glance
The EMG 89 is a dual-mode active humbucker that switches between tight single-coil articulation and thick dual-coil aggression, ideal for metal, hard rock, and progressive players who demand tonal flexibility without rewiring. Built with Alnico V magnets, solderless connections, and a long shaft design for deep-cavity guitars, it delivers controlled sustain and clarity that cuts through live mixes while running a year on a single 9V battery. Choose it for road-tested reliability, gig-ready clarity, and the ability to dial in everything from crisp definition to compressed power.
Who This Is For
| Best suited for | Metal, Hard Rock, Progressive, Studio Sessions, Gigging |
|---|---|
| Tonal character | Tight low end, articulate highs, high output, compressed sustain, versatile single-coil to dual-coil switching |
| Less specialized for | Traditional Jazz, Folk, Worship (it will do it; instruments voiced for that style do it more easily) |
| Skill level | Intermediate / Advanced / Professional |
Frequently Asked Questions
What's the difference between single-coil and dual-coil mode on the EMG 89?
Single-coil mode delivers crisp, articulate highs at 0.6V RMS output with a 3.75 kHz resonant frequency, while dual-coil mode produces thick, compressed output at 1.0V RMS with a 2.55 kHz resonant frequency. You switch between modes using the included push/pull potentiometer without any rewiring.
Will this pickup fit my guitar?
The EMG 89 is a long shaft variant (22.9 mm installation depth) designed for guitars with deeper pickup cavities. It has a 69.9 x 38.1 mm mounting footprint and 78.5 mm screw spacing; verify your guitar's cavity depth and screw spacing before purchasing.
How long does the battery last?
The 9-volt battery draws only 160 microamps, providing up to one year of typical battery life under normal daily use. Battery life depends on how frequently you engage the active circuit.
What's included, and how hard is installation?
The pickup includes a 25k sound potentiometer, 25k push/pull potentiometer, battery bus, stereo output jack, mounting hardware, and a solderless connection system that simplifies wiring and reduces installation errors. No soldering is required.
How does the EMG 89 compare to other active pickups like Seymour Duncan Blackouts or Fishman Fluence?
The EMG 89 distinguishes itself with true dual-mode switching in a single pickup, letting you access both articulate single-coil clarity and compressed dual-coil power without rewiring. Its Alnico V magnets deliver warm, focused tone with tight lows and articulate highs, sitting between the Blackouts' aggression and the Fluence's modern versatility.
Do I pay sales tax on this order?
Sales tax is collected only on orders shipped to California; orders shipped to any other US state are not charged sales tax at checkout when you buy direct from our website. At a typical 7% rate that is an estimated $10 less at checkout than the same listed price on a marketplace, which collects sales tax as the facilitator in most states. Buyers remain responsible for any use tax their state applies. Free US shipping and 30-day returns are included.
Compare With
Similar Gear
Complete the Rig
Gear that pairs well with this.
✨ For You
Based on what you've been looking at.