EMG 89 Long Shaft Active Humbucker Pickup in Brushed Chrome
Share
- Brand new in original box
- Full EMG manufacturer's warranty
- Free shipping in the continental US
In stock
- SKU
- EMG6206
Description
EMG 89 Long Shaft Active Humbucker Pickup in Brushed Chrome
The EMG 89 is a workhorse active humbucker built for players who need tonal range without swapping pickups. Its brushed chrome finish fits both modern and classic rigs, while the long-shaft potentiometer design handles thicker bodies and custom builds without fuss. On stage and in the studio, this pickup delivers—switching between articulate single-coil clarity and thick, aggressive dual-coil response to cover everything from clean tones to high-gain crunch in one install.
Dual-Mode Versatility & Output
Push/pull the pot to switch between stacked Alnico V single-coil mode (1.00V output) and full dual-coil mode (2.00V output). Each mode stays true to its character—single-coil mode gives you definition and snap for articulate playing, dual-coil engages a thicker, EMG-85-like punch for saturated rhythm work. An output impedance of 10 kohm and noise floor of -107 dB (single-coil) / -109 dB (dual-coil) mean clean signal into your amp with zero hum, night after night.
Power Efficiency & Solderless Installation
The active circuitry sips power at only 160 microamps at 9V, yielding approximately 1500 hours of battery life from a standard 9V cell—plenty of touring before you swap it out. Solderless connections and a complete wiring harness—stereo output jack, 25k tone and push/pull potentiometers, battery bus, mounting hardware, and cartridge cable—keep setup fast and reliable. Maximum supply rating of 27V DC lets you run multi-battery stacks if you demand extended session runtime.
Key Features
- Dual-mode operation: stacked Alnico V single-coil and dual-coil configurations with separate outputs
- Dimensions: 69.9 × 38.1 × 22.9 mm with 78.5 mm fixing screw distance
- 18.7 mm long-shaft potentiometer design for thicker bodies and custom installations
- Alnico V magnet construction in both single-coil and dual-coil modes
- Output voltage: 1.00V single-coil / 2.00V dual-coil
- Output impedance: 10 kohm
- Noise floor: -107 dB single-coil / -109 dB dual-coil at 60 Hz
- Active circuit: 160 µA draw at 9V, ~1500 hours battery life, 27V DC maximum supply
- Solderless connectors with 25k tone potentiometer and 25k push/pull potentiometer included
- Complete hardware package: battery bus, stereo output jack, mounting screws, springs, and cartridge cable
- 3/48 standard mounting holes
- Made in USA; brushed chrome finish
The EMG 89 marries American build quality, rock-solid active electronics, and real tonal switching in one hardworking package—designed for gigging musicians who refuse to compromise between clarity and power.
More Information
| Condition | New |
|---|
Reviews
At a Glance
The EMG 89 is a dual-mode active humbucker that switches between a tight, articulate single-coil voice and a thick, full dual-coil response without a pickup swap—all via a push/pull pot. Built for intermediate to professional players who gig and record, it delivers high output, ultra-low noise (-107 dB), and 1500+ hours of battery life from a single 9V cell. Choose it for the tonal range, road reliability, and solderless installation that lets you get on stage with minimal setup fuss.
Who This Is For
| Best suited for | Studio Sessions, Home Recording, Live Performance, Extended Range |
|---|---|
| Tonal character | High output, articulate cleans, low noise, versatile, dual-mode character |
| Less specialized for | Practice, Budget-conscious beginners (it will do it; instruments voiced for that style do it more easily) |
| Skill level | Intermediate / Advanced / Professional |
Frequently Asked Questions
What's the difference between single-coil and dual-coil mode on the EMG 89?
Single-coil mode uses a stacked Alnico V configuration with 1.00V output for bright, articulate cleans with minimal noise. Dual-coil mode engages the full humbucker for 2.00V output and a thicker, EMG-85-like response. Toggle between them via the included push/pull potentiometer without swapping pickups.
How long will the battery last?
The active circuit draws only 160 microamps at 9V, providing approximately 1500 hours of battery life per 9V cell. You can also wire multiple batteries in series for up to 27V DC supply if you need extended sessions without battery changes.
What's included in the box, and is soldering required?
The EMG 89 ships with a complete solderless wiring harness, stereo output jack, 25k tone and push/pull potentiometers, battery bus, mounting hardware, and cartridge cable. No soldering needed—just connect and install.
Will this fit my guitar, and what does 'long-shaft' mean?
The long-shaft design (18.7 mm) accommodates thicker guitar bodies and custom builds where standard potentiometers won't reach through the control cavity. Dimensions are 69.9 × 38.1 × 22.9 mm with standard 3/48 mounting holes.
How does the EMG 89 compare to the EMG 85 or Seymour Duncan JB Jr?
The 89 offers dual-mode flexibility the 85 doesn't—switch between single-coil clarity and dual-coil thickness. It delivers lower noise than most passive alternatives and shares the JB Jr's mid-range punch but with active electronics and switchable voicing for more tonal range.
Do I pay sales tax on this order?
Sales tax is collected only on orders shipped to California; orders shipped to any other US state are not charged sales tax at checkout when you buy direct from our website. At a typical 7% rate that is an estimated $10 less at checkout than the same listed price on a marketplace, which collects sales tax as the facilitator in most states. Buyers remain responsible for any use tax their state applies. Free US shipping and 30-day returns are included.
Compare With
Similar Gear
Complete the Rig
Gear that pairs well with this.
✨ For You
Based on what you've been looking at.