Do I need a battery or external power for this pickup?

No. The H2A-B is completely passive, so it requires no battery or external power supply — just plug it in and play.

What guitar bridge types does this pickup fit?

The pole piece spacing of 0.388 inches is designed for Tune-o-matic bridge saddles, which are standard on many Gibson-style guitars and similar instruments.

Is this pickup suitable for high-gain or metal genres?

The H2A-B is voiced for blues, rock, jazz, and studio sessions; it prioritizes clarity and articulation rather than extreme gain, so it is not recommended for djent or thrash metal styles.

How does the wiring work, and is installation easy?

The pickup uses a 5-wire quick-connect output with full shielding to minimize noise and simplify wiring modifications — standard guitar electronics knowledge is all you need for installation.

How does this compare to other passive humbuckers in its class?

The H2A-B combines vintage voicing with a balanced frequency response that avoids mud; its Alnico V magnets and dual resonant peaks place it in the same family as the Seymour Duncan 59, DiMarzio Super Distortion, and Gibson Classic 57, each with slightly different character depending on your amp and playing style.

Do I pay sales tax on this order?

Sales tax is collected only on orders shipped to California; orders shipped to any other US state are not charged sales tax at checkout when you buy direct from our website. Marketplaces collect sales tax as the facilitator in most states, so the same listed price can cost more there. Buyers remain responsible for any use tax their state applies. Free US shipping and 30-day returns are included.

EMG H2A-B Passive Humbucker Pickup in Brushed Gold

The EMG H2A-B delivers articulate, vintage-voiced output without requiring any external power supply. This passive humbucker pairs Alnico V magnets with a carefully voiced winding to produce clarity and definition across the frequency spectrum, making it a reliable choice for players seeking classic humbucker response with modern construction standards on stage and in the studio.

Tone & Electrical Performance

With a DC resistance of 8.40 kOhm and inductance of 4.90 Henries, this pickup exhibits dual resonant peaks at 2.12 kHz and 3.82 kHz, delivering a balanced frequency response that avoids mud while maintaining the articulation needed to cut through a live mix. The impedance at resonance of 65.40 kOhm ensures efficient coupling to standard guitar electronics and amplifier inputs, so you'll get consistent tone whether you're plugged into a small combo or a full PA system.

Design & Specifications

The pickup measures 2.75 x 2.38 x 6 inches and features pole piece spacing of .388" (9.85mm), designed for proper alignment with Tune-o-matic bridge saddles. Installation is straightforward thanks to the 5-wire quick-connect output with fully shielded design, minimizing noise and simplifying wiring modifications—critical for road-ready reliability and quick troubleshooting between gigs.

Key Features

Alnico V magnet construction
Vintage wind configuration
DC Resistance: 8.40 kOhm
Inductance: 4.90 Henries
Resonant Frequency (1): 2.12 kHz
Resonant Frequency (2): 3.82 kHz
Impedance at Resonance: 65.40 kOhm
5-wire quick-connect output with full shielding
Pole piece spread: .388" (9.85mm) for Tune-o-matic bridges
Brushed Gold logo finish
Passive design — no battery or external power required

The H2A-B combines vintage voicing with modern engineering, delivering dependable performance for gigging musicians and collectors who prioritize tone definition, straightforward installation, and long-term reliability.

Best suited for	Blues, Rock, Jazz, Studio Sessions
Tonal character	Articulate, vintage-voiced, balanced frequency response, clarity and definition, avoids mud
Less specialized for	Djent, Thrash Metal (it will do it; instruments voiced for that style do it more easily)
Skill level	Beginner / Intermediate / Advanced / Professional