Does the EMG HA require a battery, and how long does it last?

Yes, the HA runs on a 9V battery at only 80 µA draw, yielding approximately 3000 hours of battery life—roughly four months of continuous play. The battery system is included with the pickup.

Is this pickup easy to install?

Yes. The EMG HA uses a solderless installation system and includes 25k volume and tone potentiometers, battery bus, all cables, connectors, and mounting hardware—no soldering required.

What makes the EMG HA good for noisy environments?

The HA delivers a −101 dBV noise floor at 60 Hz and uses active Alnico electronics to reject hum and electrical interference. This makes it reliable for live stages and studios with high electromagnetic noise.

How does the EMG HA compare to other active single-coils?

The HA balances single-coil brightness and articulation with the hum immunity and output control of active design. Its 4.05 kHz resonant frequency produces a focused midrange suited to defined articulation, distinguishing it from models prioritizing vintage tone or maximum output.

Can I use the EMG HA in a higher-voltage setup?

Yes, the HA is rated for up to 27V DC supply voltage, so it will work in rigs running higher-voltage systems.

Do I pay sales tax on this order?

Sales tax is collected only on orders shipped to California; orders shipped to any other US state are not charged sales tax at checkout when you buy direct from our website. Marketplaces collect sales tax as the facilitator in most states, so the same listed price can cost more there. Buyers remain responsible for any use tax their state applies. Free US shipping and 30-day returns are included.

EMG HA Active Single Coil Pickup in Chrome

The EMG HA is a modern active single-coil design that delivers articulate, controlled output without sacrificing the brightness and definition inherent to single-coil topology. The chrome finish provides both visual distinction and corrosion resistance. This pickup suits gigging and studio players who need low-noise clarity and reliable performance in a compact, battery-powered format.

Electronics & Performance

Built on Alnico magnets with a 4.05 kHz resonant frequency, the HA produces a focused midrange character suited to defined articulation and reduced hum. The -101 dBV noise floor at 60 Hz and 10 kΩ output impedance ensure minimal noise interference even in electrically hostile venues and live rigs, making this pickup reliable for both stage performance and recording sessions.

Power & Installation

The 9V battery system runs at only 80 µA, yielding 3000 hours of battery life—roughly four months of continuous play. Solderless installation with included 25k volume and tone potentiometers, battery bus, cables, and mounting hardware accelerates setup; the pickup also tolerates up to 27V DC for users running higher-voltage systems.

Key Features

Alnico magnet construction
4.05 kHz resonant frequency
−101 dBV output noise at 60 Hz
10 kΩ output impedance
9V battery power at 80 µA draw
3000-hour battery life
Maximum 27V DC supply voltage rating
Solderless installation system
Includes 25k volume and 25k tone potentiometers
Stereo output jack and two-pickup in/out bus
Complete cable and connector set included
Chrome finish

The HA balances the tonal openness of single-coil design with the noise immunity and output control of active electronics, making it a dependable choice for musicians demanding professional-grade performance and reliability on the road or in the studio.

Best suited for	Studio Sessions, Home Recording, Live Performance, Extended Range
Tonal character	Articulate, bright, focused midrange, low noise, controlled output
Less specialized for	Vintage Tone Purists, Battery-Free Setups (it will do it; instruments voiced for that style do it more easily)
Skill level	Intermediate / Advanced / Professional