What string spacing does the P6 accommodate?

The P6 is designed for tight 6-string configurations with a maximum string spacing of 3 inches (76 mm), thanks to its compact footprint and short, squat coil design.

How long does a 9V battery last in the P6?

The P6 draws only 80 microamps at 9V, yielding approximately 3000 hours of battery life per charge.

What tone should I expect from the P6?

The P6 delivers articulate mids and punchy attack with a 3.20 kHz resonant frequency that captures definition without excessive high-end harshness. Output scales dynamically from 2.00 V for standard finger technique to 4.50 V for aggressive thump.

What comes in the box?

The P6 includes the pickup, a 25K volume pot, 25K tone pot, battery bus, stereo output jack, mounting screws, pickup cable, connect cables, output cable, and battery cable—everything needed for installation.

Is the P6 suitable for studio recording?

Yes. Its -106 dB noise floor at 60 Hz ensures virtually silent operation in studio contexts, and its transparent midrange response makes it well-suited for capturing clean, articulate bass in a mix.

Do I pay sales tax on this order?

Sales tax is collected only on orders shipped to California; orders shipped to any other US state are not charged sales tax at checkout when you buy direct from our website. Marketplaces collect sales tax as the facilitator in most states, so the same listed price can cost more there. Buyers remain responsible for any use tax their state applies. Free US shipping and 30-day returns are included.

EMG P6 6-String Active Bass Pickup in Black

The EMG P6 is a precision-engineered active pickup built for 6-string bass players who need clarity and punch that cuts through a live mix. Its compact footprint and short, squat coil design fit tight string spacing without compromise, making it a go-to choice for modern bass rigs that demand articulate mids and controlled response on stage and in the studio.

Tone & Output Characteristics

The 3.20 kHz resonant frequency sits in the midrange where definition lives—you get punch and presence without brittle highs. Output voltage tracks your playing dynamics naturally—2.00 V from fingerstyle and thumb technique, climbing to 4.50 V when you dig in hard—so your tone breathes and responds without overwhelming your preamp or direct box.

Electronics & Power Efficiency

Running at just 80 microamps @ 9V, this active design delivers exceptional battery life of 3000 hours, keeping you playing through long tours and sessions. The 10 kΩ output impedance locks in clean signal transfer to any bass amp input, and the -106 dB noise floor at 60 Hz stays dead silent whether you're tracking or performing live. Maximum supply voltage tolerance reaches 27 VDC, so you can run higher-voltage preamp setups without issue.

Key Features

Ceramic magnet construction for focused, defined tone
Short, squat coil design optimized for 6-string spacing
Maximum string spacing: 3 inches (76 mm)
Resonant frequency: 3.20 kHz
Finger/thumb output voltage: 2.00 V
Thump output voltage: 4.50 V
Output noise floor: -106 dB @ 60 Hz
Output impedance: 10 kΩ
Current draw: 80 microamps @ 9V
Battery life: 3000 hours
Maximum supply voltage: 27 VDC
Includes 25K volume pot, 25K tone pot, battery bus, stereo output jack, mounting screws, pickup cable, connect cables, output cable, and battery cable

The EMG P6 combines efficient active circuitry, transparent midrange response, and complete component integration—a turnkey solution for 6-string bassists counting on reliability and articulation gig after gig.

Best suited for	Funk, Jazz, Studio Sessions, Live Performance
Tonal character	Articulate mids, punchy attack, controlled output, focused definition, transparent midrange
Less specialized for	Traditional Folk, Acoustic-focused applications (it will do it; instruments voiced for that style do it more easily)
Skill level	Intermediate / Advanced / Professional