EMG Stacked Bass/Treble Control (1 Potentiometer
- Brand new in original box
- Full EMG manufacturer's warranty
- Free shipping in the continental US
In stock
- SKU
- EMG371
Description
EMG Stacked Bass/Treble Control (BTC) — 1 Potentiometer
The EMG BTC Control is a compact, concentric stacked potentiometer built for bass players and sound engineers who need surgical tone-shaping in a single control footprint. Its dual-knob architecture—bass and treble stacked on one shaft—delivers professional-grade EQ without sacrificing real estate on crowded control panels or pedalboards. Built on surface mount technology, this circuit operates with minimal current draw and exceptional signal clarity for reliable gig-to-gig performance.
Signal Path & Tone Shaping
The BTC offers ±12dB of gain/attenuation on both bass and treble circuits, with the bass control centered at 20Hz for deep low-end sculpting that cuts through a live mix. Treble response is programmable via dual-dip switches across 2100 Hz, 3500 Hz, 4500 Hz, and 7000 Hz, allowing you to tailor high-end character for different venues and stage setups. Input impedance of 1 MegOhm and -120dBV input-referred noise ensure transparent signal handling with virtually no self-noise, keeping your tone pristine whether you're playing small clubs or larger rooms.
Power & Road Reliability
Operating from a standard 9V battery (rated for approximately 750 hours of use), the BTC draws only 600 microamps at 9V, making it ideal for active bass systems with minimal battery drain during extended sets and touring. The circuit supports up to 27V DC maximum, with an 18V recommended supply for extended headroom, and delivers 2K Ohm output impedance for reliable interaction with downstream preamps, mixing consoles, and house sound systems.
Key Features
- Concentric (stacked) shaft design—bass and treble controls on single potentiometer
- Bass control frequency: 20Hz
- Treble control frequencies (selectable via dip switch): 2100 Hz, 3500 Hz, 4500 Hz, 7000 Hz
- Gain/Attenuation: ±12dB on both bass and treble circuits
- Input Impedance: 1 MegOhm
- Output Impedance: 2K Ohms
- Input-Referred Noise: -120dBV
- Operates on 9V battery (750-hour battery life); supports up to 27V DC maximum
- Current draw: 600µA @ 9V, 740µA @ 18V
- Surface mount technology with minimal current consumption
- Includes concentric knobs, battery clip with buss connector, stereo output jack with battery switching, and four interconnect cables (2 red, 2 white)
- Dual-dip switch for programmable high-end frequency response
The EMG BTC Control combines studio-grade tone control with ultra-low noise and exceptional efficiency—a benchmark solution for active bass systems and players who demand reliable, transparent EQ on stage and in the studio.
More Information
| Condition | New |
|---|
Reviews
At a Glance
The EMG Stacked Bass/Treble Control is a compact, single-potentiometer EQ that gives bass players surgical control over low-end and high-end character with ±12dB of gain on each band. Built on low-noise surface-mount technology and programmable treble frequencies (2.1k–7kHz via dip switch), it delivers transparent tone-shaping for active bass rigs without draining batteries or eating up valuable control real estate. Choose it for gigging and studio work when you need pro-grade EQ in a space-efficient footprint.
Who This Is For
| Best suited for | bass guitar setup, active bass systems, studio sessions, live performance |
|---|---|
| Tonal character | Surgical eq, transparent signal, minimal noise, extended low-end sculpting, programmable high-end character |
| Less specialized for | passive instruments, budget builds (it will do it; instruments voiced for that style do it more easily) |
| Skill level | Intermediate / Advanced / Professional |
Frequently Asked Questions
What skill level is required to install this control?
This is an intermediate-to-advanced component suited for bass players and engineers experienced with active electronics. Installation requires soldering and basic circuit knowledge; it is not recommended for first-time builders or passive instrument setups.
Can I adjust the treble frequency, or is it fixed?
The treble frequency is programmable via dual-dip switches and can be set to 2100 Hz, 3500 Hz, 4500 Hz, or 7000 Hz, allowing you to tailor the high-end character to different instruments and playing styles.
How long will a 9V battery last in this control?
A standard 9V battery is rated for approximately 750 hours of use, thanks to the control's minimal current draw of 600 microamps at 9V. The circuit also supports up to 27V DC maximum if you need extended headroom.
What comes in the box with this control?
The package includes concentric knobs, a battery clip with buss connector, a stereo output jack with battery switching, and four interconnect cables (two red, two white) for signal routing.
How does this compare to other stacked bass/treble controls?
The EMG BTC offers surgical EQ with ±12dB range on both bands, programmable treble frequencies, and studio-grade noise performance (-120dBV input-referred noise), placing it on par with controls like the Aguilar Tone Hammer and Seymour Duncan 3-Band EQ in terms of transparency and tone-shaping precision.
Do I pay sales tax on this order?
Sales tax is collected only on orders shipped to California; orders shipped to any other US state are not charged sales tax at checkout when you buy direct from our website. Marketplaces collect sales tax as the facilitator in most states, so the same listed price can cost more there. Buyers remain responsible for any use tax their state applies. Free US shipping and 30-day returns are included.
Compare With
✨ For You
Based on what you've been looking at.