Seymour Duncan Humbucker STL-3T Quarter Pound Tapped Lead Pickup For T
Share
Seymour Duncan Humbucker STL-3T Quarter Pound Tapped Lead Pickup For Tele
In stock
- SKU
- 11202-14-T
Description
Seymour Duncan Humbucker STL-3T Quarter Pound Tapped Lead Pickup For Tele
The STL-3T Quarter Pound delivers thick, articulate single-coil character with the body and sustain of a true humbucker, engineered specifically for Telecaster bridge positions. The tapped configuration lets you dial between two distinct voicings from a single pickup, adding versatility without routing or swapping hardware. This is a workhorse for gigging players who need serious output and tonal range from a traditional platform.
Tone & Electronics
Built around Alnico V rod magnets with a 0.25" diameter, this pickup generates robust, punchy mids and extended treble presence. The tapped voice hits 6.1 kHz resonant peak for snappier transients, while the full coil peaks at 3.5 kHz for deeper warmth—a meaningful difference across rhythm and lead work onstage. EQ balance of 7 bass / 5 mid / 7 treble keeps highs articulate without brittleness while maintaining low-end authority that cuts through a mix.
Specifications & Wiring
Rated at 8 kΩ DC resistance (tapped) and 17.38 kΩ DC resistance (full coil), this pickup seats securely in standard Telecaster bridge cavities and wires via 3-conductor lead for easy coil-tap switching. The single conductor PVC cable runs cleanly through existing routing, minimizing installation complexity and road-ready setup time.
Key Features
- Seymour Duncan Quarter Pound Tapped design for Telecaster bridge position
- Alnico V rod magnets, 0.25" diameter
- DC Resistance (Tapped): 8 kΩ
- DC Resistance (Full): 17.38 kΩ
- Resonant Peak (Tapped): 6.1 kHz
- Resonant Peak (Full): 3.5 kHz
- EQ: 7 Bass / 5 Mid / 7 Treble
- 3-conductor lead for coil-tap switching
- Single conductor PVC cable
- Dual-voice operation without additional hardware
The STL-3T combines aggressive output with genuine tonal flexibility, making it a reliable bridge pickup for Telecasters on the stage and in the studio where punch and versatility matter.
More Information
| Condition | New |
|---|---|
| Country of Manufacture | United States |
Reviews
At a Glance
The Seymour Duncan STL-3T Quarter Pound is a tapped humbucker built for Telecaster bridge positions, delivering thick, articulate tone with punchy mids and extended treble from a single pickup. The coil-tap function gives you two distinct voicings—a snappier 6.1 kHz peak for lead work and a warmer 3.5 kHz voice for rhythm—without routing or swapping hardware. Built on Alnico V magnets with robust output, it's built for rock, hard rock, blues, and country players who need serious tonal range and reliability from a traditional platform.
Who This Is For
Great for
- ✓ Rock
- ✓ Hard Rock
- ✓ Blues
- ✓ Country
Not the best pick for
- – Jazz
- – Folk
Skill level: Intermediate · Advanced · Professional
Frequently Asked Questions
What's the difference between the tapped and full-coil voicings?
The tapped voice peaks at 6.1 kHz for snappier transients and brighter lead tone, while the full coil peaks at 3.5 kHz for deeper warmth and body. You can switch between them using a standard coil-tap control without removing or changing the pickup.
Will this pickup fit my Telecaster bridge position?
Yes—the STL-3T is engineered specifically for standard Telecaster bridge cavities and wires via a 3-conductor lead for easy coil-tap switching. Installation uses existing routing, minimizing complexity.
What genres and playing styles is this pickup suited for?
The STL-3T excels in rock, hard rock, blues, and country. Its punchy mids, extended treble, and robust output make it ideal for intermediate, advanced, and professional players seeking aggressive articulation and tonal versatility. It is not recommended for jazz or folk applications.
How does the output level compare to other bridge pickups?
Rated at 8 kΩ DC resistance (tapped) and 17.38 kΩ (full coil), the STL-3T delivers robust, aggressive output typical of the Seymour Duncan Quarter Pound series. It sits between single-coil snap and humbucker body, making it a practical middle ground for players needing punch without excessive gain.
What's included and how complex is installation?
The pickup ships ready to install with a 3-conductor lead for coil-tap wiring and a single-conductor PVC cable that routes through existing Telecaster cavities. You'll need a coil-tap switch and basic soldering knowledge; no routing or modifications are required.
Compare With
Similar Gear
Complete the Rig
Gear that pairs well with this.
✨ For You
Based on what you've been looking at.