Seymour Duncan SH-6b Duncan Distortion White Pickup
Share
- Brand new in original box
- Full Seymour Duncan manufacturer's warranty
- Free shipping in the continental US
In stock
- SKU
- 11102-21-W
Description
Seymour Duncan SH-6b Duncan Distortion White Pickup
The SH-6b Duncan Distortion is built for players who need aggressive output without losing note clarity on stage. This bridge-position humbucker cuts through the mix in high-gain settings while keeping definition sharp enough to hear every picked note, even in the heaviest material. The white finish brings classic looks with modern performance engineering.
Tone & Electronics
A ceramic bar magnet and 16.6 kOhm DC resistance pack serious output without turning your tone to mud, while the 5.5 kHz bridge resonant peak pushes the aggression that makes this pickup stand out. Hum canceling keeps the noise floor clean in any live rig or studio setting, holding tight even under sustained high-gain demands.
Construction & Reliability
Hand-assembled in Santa Barbara, this pickup uses vacuum wax potting to eliminate microphonic feedback and deliver tour-ready dependability. The 4-conductor lead wire gives you wiring flexibility for different configurations, while the nickel-silver bottom plate adds structural durability and tonal focus.
Key Features
- Humbucker type (passive)
- Bridge/Tremolo position
- DC Resistance: 16.6 kOhm
- Ceramic bar magnet
- Hum canceling construction
- Bridge resonant peak: 5.5 kHz
- White finish
- Vacuum wax potted for squeal-free performance
- 4-conductor lead wire for multiple wiring options
- Nickel-silver bottom plate
- Handmade in Santa Barbara, California
This SH-6b is Seymour Duncan's answer for gigging players who refuse to compromise between raw power and the articulation needed to lock in with a live band.
More Information
| Condition | New |
|---|
Reviews
At a Glance
The Seymour Duncan SH-6b Duncan Distortion is a high-output bridge humbucker engineered for metal, hard rock, and djent—delivering aggressive tone with tight definition and controlled sustain that cuts through a band mix without muddying. Built in Santa Barbara with vacuum wax potting and a ceramic magnet, it stays squeal-free under heavy gain and high-volume stage use. Choose it if you need articulate, powerful aggression that separates each note even in the heaviest riffs.
Who This Is For
Great for
- ✓ Metal
- ✓ Hard Rock
- ✓ Djent
- ✓ Thrash Metal
Not the best pick for
- – Jazz
- – Blues
- – Folk
Skill level: Intermediate · Advanced · Professional
Frequently Asked Questions
What position is this pickup designed for?
The SH-6b Duncan Distortion is a bridge-position humbucker. Its high output and 5.5 kHz resonant peak are voiced specifically to balance aggression with note clarity at the bridge.
Will this pickup work for genres outside metal and hard rock?
The SH-6b is optimized for metal, hard rock, djent, and thrash. Its character—high output, tight sustain, and emphasized top end—is not well-suited to jazz, blues, or folk playing styles.
What makes this pickup different from other high-output options?
The SH-6b combines a ceramic bar magnet and 16.6 kOhm resistance with a 5.5 kHz bridge resonant peak to deliver aggression without sacrificing note definition. Vacuum wax potting eliminates microphonic squeal, and the 4-conductor lead wire enables multiple wiring configurations for tonal shaping.
Is this pickup handmade, and where?
Yes, the SH-6b is hand-assembled in Santa Barbara, California, with vacuum wax potting and a nickel-silver bottom plate for long-term reliability and consistent performance.
What is the DC resistance and magnet type?
The SH-6b has a DC resistance of 16.6 kOhm and uses a ceramic bar magnet. Hum-canceling construction ensures noise-free operation in live and studio environments.
Compare With
Similar Gear
Complete the Rig
Gear that pairs well with this.
✨ For You
Based on what you've been looking at.