What's the difference between the C417 PP and C417 L?

The C417 PP features a standard XLR connector for use with mixer inputs or wireless mic systems. The C417 L has a three-pin mini XLR connector designed to plug directly into AKG wireless body pack transmitters for seamless integration.

Is this mic suitable for recording singing or instruments in the studio?

No—the C417 is optimized for dialogue, speech, and ambient sound in live and broadcast settings. For instrument recording, a studio-focused condenser microphone will perform better.

How discreet is the C417 when clipped to clothing?

At 15mm in height and 7.5mm in diameter, the C417 is exceptionally small and lightweight at 68g, allowing it to hide on jackets, collars, and costumes without drawing visual attention during performance or presentation.

What comes in the box?

The C417 includes a 1.5m cable (XLR or mini XLR depending on model), tie clip, tie pin, foam windscreen, and microphone carrying bag—everything needed for immediate deployment.

How clean is the audio in quiet environments like theaters and conferences?

The C417 has an equivalent noise level of 34 dB-A and a 60 dB signal-to-noise ratio, delivering minimal self-noise even in silent venues where background hum and hiss can be problematic.

AKG C417 Professional Lavalier Microphone

The C417 is an exceptionally compact and lightweight lavalier designed to stay out of sight during live performances and studio work without compromising audio quality. Its diminutive 15mm height and 7.5mm diameter allow discreet placement on stage clothing and costumes while remaining sonically transparent. The omnidirectional pickup pattern delivers consistent, open sound from all angles—essential for performers who move across a stage or need reliable coverage during unpredictable live moments.

Design & Build

This pre-polarized condenser microphone ships in two connector variants: the C417 PP with standard XLR, and the C417 L with professional three-pin mini XLR for direct integration with AKG wireless body pack transmitters. The matte black finish and included tie clip, tie pin, windscreen, and microphone bag make it ready for immediate deployment in any live or studio setting.

Audio Performance

The C417 delivers balanced, natural sound reproduction across a 20–20,000 Hz bandwidth with 7 mV/Pa sensitivity and a maximum SPL of 126 dB, handling everything from intimate vocals to amplified instruments on stage. A low equivalent noise level of 34 dB-A and 60 dB signal-to-noise ratio ensure clean audio with minimal self-noise, even in quiet venues or studio environments where background interference must be controlled.

Key Features

Pre-polarized condenser microphone
Omnidirectional polar pattern for unchanging sound quality in all directions
Audio frequency bandwidth: 20–20,000 Hz
Sensitivity: 7 mV/Pa
Maximum SPL: 126 dB (3% THD)
Equivalent noise level: 34 dB-A; Signal-to-noise ratio: 60 dB-A
Extremely lightweight and inconspicuous—15mm height, 7.5mm diameter, 68g net weight
Electrical impedance: 200 Ohms; Recommended load: 1,000 Ohms
2 to 12V phantom power; 2 mA current consumption
Available in C417 PP (standard XLR) or C417 L (three-pin mini XLR) connectors
1.5m cable included
Supplied with tie clip, tie pin, windscreen, and microphone bag

The AKG C417 remains the trusted choice for performers and live event professionals who demand invisible mic placement without sacrificing sonic integrity.

Condition	New
Country of Manufacture	China