AKG C451 B Reference Small-Diaphragm Condenser Microphone
In stock
Only 1 left
- SKU
- 2895H00010
Description
AKG C451 B Reference Small-Diaphragm Condenser Microphone
The AKG C451 B is a compact, precision instrument microphone engineered for live sound work and studio recording. Its slim 19 mm barrel and 160 mm length make it ideal for close placement on drums, guitar amplifiers, and orchestral instruments without occupying excessive space. The cardioid polar pattern provides focused pickup with excellent off-axis rejection, making this microphone a workhorse for isolation and directional miking tasks on stage and in the studio.
Audio Performance
This reference-grade condenser delivers a flat 20–20,000 Hz frequency response with low distortion across the audible spectrum. The 76 dB-A signal-to-noise ratio and 18 dB-A equivalent noise level ensure clean signal even in noisier venue environments, while the 135/145/155 dB maximum SPL (switchable at -0/-10/-20 dB attenuation) handles everything from quiet acoustic sources to loud drums and percussion without breakup—essential for reliable live capture.
Design & Build
Housed in a satin nickel-plated finish that resists corrosion, the C451 B features rugged construction built for both studio use and the road. The microphone includes dual switchable controls—a preattenuation pad (-10, -20 dB) for managing hot sources and a bass cut filter (75, 150 Hz) for taming proximity effect or venue rumble. A balanced XLR 3-pin male output connects to any standard microphone preamp, and the unit operates on standard phantom power (9–52 V at 2 mA current consumption), making it compatible with all professional mixing consoles and preamps.
Key Features
- Cardioid polar pattern for focused, directional pickup
- Frequency response: 20–20,000 Hz
- Sensitivity: 9 mV/Pa
- Signal-to-noise ratio: 76 dB-A
- Equivalent noise level: 18 dB-A
- Maximum SPL: 135/145/155 dB with switchable attenuation pads
- Preattenuation pad: -10 dB, -20 dB
- Bass cut filter: 75 Hz, 150 Hz
- Balanced XLR 3-pin male output
- Electrical impedance: 200 Ohms
- Recommended load impedance: 1000 Ohms
- Phantom power: 9–52 V, 2 mA
- Satin nickel-plated finish
The C451 B combines precise audio capture, practical control options, and reliable construction in a form factor that works seamlessly into live sound systems and professional recording setups.
More Information
| Condition | New |
|---|---|
| Country of Manufacture | Hungary |
Reviews
At a Glance
The AKG C451 B is a compact, precision small-diaphragm condenser built for drums, amps, and instrument miking in both studio and live settings. Its cardioid pickup, flat response, and switchable attenuation pads let you isolate sources cleanly without feedback or distortion, even at stage volumes. Road-tested construction and a slim 19 mm barrel make it reliable for touring and tight mic placements on any rig.
Who This Is For
| Best suited for | studio sessions, live performance, drum recording, instrument miking |
|---|---|
| Tonal character | Flat response, articulate, low noise, tight off-axis rejection, controlled proximity effect |
| Less specialized for | vocal recording, room ambience capture (it will do it; instruments voiced for that style do it more easily) |
| Skill level | Intermediate / Advanced / Professional |
Frequently Asked Questions
Is the C451 B good for vocal recording?
No; this microphone is optimized for instrument and drum recording with tight off-axis rejection and controlled proximity effect. For vocals, a large-diaphragm condenser is a better match.
What attenuation and filtering options does it have?
The C451 B includes a switchable preattenuation pad (-10 dB and -20 dB settings) to handle loud sources without distortion, and a bass cut filter with two selectable frequencies (75 Hz and 150 Hz) to reduce proximity effect or room rumble.
Can it handle loud drums and percussion?
Yes; maximum SPL reaches 135 dB, 145 dB, or 155 dB depending on which attenuation pad is engaged, making it suitable for close-miking drums, percussion, and amplifiers at performance levels.
What phantom power supply do I need?
The C451 B operates on standard phantom power between 9–52 V at 2 mA current draw, compatible with any professional audio interface, preamp, or mixing console with phantom power built in.
How does its size help in live or studio setups?
At 19 mm in diameter and 160 mm long, the C451 B fits into tight spaces on drum kits, inside guitar cabinets, and around orchestral instruments without blocking sight lines or taking up excess real estate on a mic stand.
Do I pay sales tax on this order?
Sales tax is collected only on orders shipped to California; orders shipped to any other US state are not charged sales tax at checkout when you buy direct from our website. At a typical 7% rate that is an estimated $52 less at checkout than the same listed price on a marketplace, which collects sales tax as the facilitator in most states. Buyers remain responsible for any use tax their state applies. Free US shipping and 30-day returns are included.
Compare With
✨ For You
Based on what you've been looking at.
.