Crown DCI2X2400N DCI2X2400 Network
Share
- Brand new in original box
- Full Crown manufacturer's warranty
- Free shipping in the continental US
In stock
Only 1 left
- SKU
- DCI2X2400N-U-USFX
. Description
Crown DCI2X2400N DriveCore Install 2|2400 Network Amplifier
The Crown DCI2X2400N is a compact, rackmount network amplifier built for fixed installations where reliable, remotely manageable power is essential. This 2-channel powerhouse delivers 2400W per channel across standard impedance loads and voltage configurations, making it the go-to choice for houses of worship, conference centers, theaters, or distributed audio systems where networked control and DSP processing are non-negotiable. Trusted by sound professionals who run permanent and semi-permanent rigs.
Power & Audio Performance
2400W per channel at 2, 4, 8, or 16 ohms—or 70/100V rms—provides headroom for demanding speaker systems while maintaining exceptional audio fidelity. The amplifier achieves ±0.25dB frequency response (20Hz–20kHz at 8Ω) and 0.35% THD at full rated power, ensuring transparent, distortion-free reproduction across the entire audio spectrum. A damping factor exceeding 5000 (20Hz–100Hz) delivers tight, controlled low-frequency response that prevents speaker cone flutter and maintains image precision.
Networking & DSP Control
Native BLU Link digital audio transport via rear-panel RJ-45 connectors eliminates analog cable runs and simplifies system integration in networked environments. HiQnet protocol over TCP/IP enables real-time monitoring, remote control, and audio manipulation from any networked device, while onboard DSP capabilities include limiting, parametric EQs, delay, and a matrix mixer for flexible signal routing and processing without external outboard gear. Monitor and adjust your system from any control point—critical for multi-zone venues and permanent installations.
Key Features
- 2-channel configuration with 2400W output per channel
- Compatible output impedances: 2Ω, 4Ω, 8Ω, 16Ω, 70Vrms, 100Vrms
- Frequency response ±0.25dB (8Ω, 20Hz–20kHz)
- Total harmonic distortion 0.35% at full rated power (20Hz–20kHz)
- Damping factor >5000 (20Hz–100Hz)
- BLU Link digital audio transport via RJ-45 networking
- HiQnet protocol control and monitoring over TCP/IP
- Built-in DSP: limiting, input/output EQs, delay, and matrix mixer
- Channel-independent impedance selection via rear-panel DIP switches
- Programmable GPIO ports for volume control, preset recall, and error reporting
The DCI2X2400N combines professional-grade amplification, networked intelligence, and onboard processing into a single chassis, built for sound operators and system integrators who need bulletproof reliability, remote manageability, and transparent audio performance night after night.
More Information
| Condition | New |
|---|---|
| Country of Manufacture | Mexico |
Reviews
At a Glance
The Crown DCI2X2400N is a 2-channel network amplifier delivering 2400W per channel with transparent, distortion-free audio and tight bass control—built for fixed installations, houses of worship, theaters, and distributed systems where remote networked management is essential. Its native BLU Link digital transport and HiQnet protocol control let you monitor and adjust the amp from anywhere on the network, while onboard DSP (EQ, limiting, delay, matrix mixer) eliminates the need for external outboard gear. Choose this amp when you need professional-grade reliability, intelligent networked control, and pristine audio fidelity in a compact rackmount form.
Who This Is For
| Best suited for | Live Performance, Studio Sessions, Worship, Fixed Installation |
|---|---|
| Tonal character | Transparent, tight low end, distortion-free, high headroom, controlled bass response |
| Skill level | Professional |
Frequently Asked Questions
What impedances and voltage outputs does the DCI2X2400N support?
The amp is compatible with 2Ω, 4Ω, 8Ω, and 16Ω loads, as well as 70Vrms and 100Vrms outputs. Channel-independent impedance selection via rear-panel DIP switches lets you configure each channel independently for different speaker systems.
Can I control and monitor this amp remotely?
Yes. The DCI2X2400N uses HiQnet protocol over TCP/IP to enable real-time monitoring, remote control, and audio manipulation from any networked device. BLU Link digital audio transport via RJ-45 connections simplifies networked integration without analog cables.
What DSP processing is built into the DCI2X2400N?
The onboard DSP includes limiting, parametric input/output EQs, delay, and a matrix mixer for flexible signal routing and processing. These tools eliminate the need for external outboard gear in fixed installations.
How transparent is the audio quality at full power?
The amp achieves ±0.25dB frequency response (20Hz–20kHz at 8Ω) and 0.35% THD at full rated power, with a damping factor exceeding 5000 (20Hz–100Hz) for tight, controlled bass and distortion-free reproduction across the entire spectrum.
Is this amp suitable for houses of worship and conference centers?
Yes. The DCI2X2400N is built specifically for fixed installations in houses of worship, conference centers, theaters, and distributed audio systems where reliable, remotely manageable power and networked control are non-negotiable.
Do I pay sales tax on this order?
Sales tax is collected only on orders shipped to California; orders shipped to any other US state are not charged sales tax at checkout when you buy direct from our website. At a typical 7% rate that is an estimated $496 less at checkout than the same listed price on a marketplace, which collects sales tax as the facilitator in most states. Buyers remain responsible for any use tax their state applies. Free US shipping and 30-day returns are included.
Compare With
Similar Gear
Complete the Rig
Gear that pairs well with this.
✨ For You
Based on what you've been looking at.