What output levels and noise floor does this set deliver?

The bridge pickup outputs 3.00V string / 4.50V strum with a 2.11 kHz resonant frequency, while the neck matches at 1.61 kHz resonance. Both achieve a -100 dB output noise floor, ensuring a clean signal even at high gain.

How long does a 9V battery last with these pickups?

Each pickup draws only 160 microamps at 9V, yielding approximately 1500 hours of battery life—roughly 2-3 months of regular playing.

What's included in this set, and do I need to solder?

The set includes matched 25K volume and tone potentiometers, stereo output jack, battery bus, pickup and connector cables, mounting hardware, and springs. The solderless 2-wire connector system eliminates the need to solder, simplifying installation.

Is the EMG 57/66 suitable for jazz or blues?

This set is designed for metal, hard rock, and progressive music where high output and controlled dynamics are prioritized. Jazz and blues players typically favor lower-output, single-coil, or passive designs for their tonal character.

How does this compare to other active humbucker options?

The EMG 57/66 competes with Seymour Duncan Blackouts, DiMarzio Fusion Edge, and Fishman Fluence Modern pickups. EMG's Alnico V magnets and tight resonance curve deliver warmth alongside articulation, while the complete wiring harness removes installation friction compared to aftermarket harnesses.

Do I pay sales tax on this order?

Sales tax is collected only on orders shipped to California; orders shipped to any other US state are not charged sales tax at checkout when you buy direct from our website. At a typical 7% rate that is an estimated $19 less at checkout than the same listed price on a marketplace, which collects sales tax as the facilitator in most states. Buyers remain responsible for any use tax their state applies. Free US shipping and 30-day returns are included.

EMG 57/66 Active Humbucker Pickup Set in Gold

The EMG 57/66 pairing delivers articulate, noise-free performance across bridge and neck positions with the clarity of active electronics and the warmth of Alnico V magnets. Built for high-output rigs where controlled dynamics and minimal hum are essential, this set offers the refined aggression active pickups are known for—ideal for players who demand reliability and consistency on stage and in the studio. The covered design and gold finish integrate seamlessly into upscale instrument builds.

Active Electronics & Output

Both pickups operate on an active 10K DC Resistance circuit drawing just 160 microamps at 9V, delivering exceptional battery life of approximately 1500 hours. The bridge pickup produces 3.00V string output and 4.50V strum output with a 2.11 KHz resonant frequency, while the neck matches those output levels at 1.61 KHz resonance—yielding balanced response across both positions with -100 dB output noise floor. That noise floor means clean signal chains without hum or interference, even under demanding live conditions.

Complete Integration Package

This set includes everything required for installation: matched 25K volume and tone potentiometers, a stereo output jack, battery bus, pickup and connector cables, and mounting hardware. The solderless connector system simplifies installation, while the included four connect cables and output/battery cables ensure proper wiring configuration. No guesswork—just plug, secure, and play.

Key Features

Active configuration with 10K DC Resistance per pickup
Bridge pickup: 2.11 KHz resonant frequency, 3.00V / 4.50V output
Neck pickup: 1.61 KHz resonant frequency, 3.00V / 4.50V output
Alnico V magnets with steel pole pieces
-100 dB output noise specification
160 microamps current draw at 9V supply
Approximately 1500-hour battery life
Solderless 2-wire connector with battery integration
Includes 2× 25K volume pots and 2× 25K tone pots
Complete cable set: pickup, connector, output, and battery cables
Mounting screws, springs, and stereo output jack included
Gold-covered 6-string humbucker design

This EMG 57/66 set brings stage-ready performance and dependable active response to your instrument—backed by a complete wiring harness that removes installation hassles and lets you focus on your tone.

Best suited for	Metal, Hard Rock, Progressive, Studio Sessions, Gigging
Tonal character	Articulate, noise-free, high-output, controlled dynamics, warm
Less specialized for	Jazz, Folk, Blues (it will do it; instruments voiced for that style do it more easily)
Skill level	Intermediate / Advanced / Professional