What is the difference between the bridge F-57TW and neck 66TW pickups?

The F-57TW uses Alnico/Ceramic magnets for aggressive output and tight low-end definition, while the 66TW pairs Alnico/Steel magnets for warmer, more articulate response. Both run active amplification at 10K DC resistance, so they sit well together in a set while maintaining distinct sonic character.

Do I need to solder these pickups, and what tools or skills are required?

No—the solderless wiring harness and 5-wire plus ground and battery configuration eliminate traditional soldering. Installation is accessible for players comfortable with basic wiring; no routing or modification is needed.

Can I switch between single-coil and dual-coil tones?

Yes. Each pickup includes a push-pull potentiometer for mode switching, allowing you to voice single and dual-coil tones on the fly without additional circuit modifications or routing.

What genres and playing styles are these pickups suited for?

The F-57TW/66TW set is designed for metal, hard rock, progressive music, and high-gain soloing where aggressive output and note definition are priorities. They are not recommended for jazz, blues, or country.

What is included in the set?

The set includes the F-57TW bridge pickup, 66TW neck pickup, solderless wiring harness, push-pull potentiometer for each pickup, two standard tone controls, and all necessary connectors and battery configuration hardware for a 6-string guitar.

Do I pay sales tax on this order?

Sales tax is collected only on orders shipped to California; orders shipped to any other US state are not charged sales tax at checkout when you buy direct from our website. At a typical 7% rate that is an estimated $22 less at checkout than the same listed price on a marketplace, which collects sales tax as the facilitator in most states. Buyers remain responsible for any use tax their state applies. Free US shipping and 30-day returns are included.

EMG F-57TW/66TW Active Humbucker Pickup Set in Chrome

The EMG 57TW/66TW set delivers the aggressive, articulate character that defined modern metal and hard rock tones. These covered chrome humbuckers combine active amplification with EMG's proprietary three-coil design, giving you genuine single-coil clarity and dual-coil punch from a single pickup configuration. The solderless wiring harness makes installation straightforward, and the included push-pull potentiometers unlock mode-switching without routing complications.

Tone & Electronics

The bridge F-57TW uses Alnico/Ceramic magnets for aggressive output and tight low-end definition, ideal for locked-in riffs and high-gain clarity on stage. The neck 66TW pairs Alnico/Steel magnets for warmer, more articulate response that cuts through live mixes without losing sustain. Both pickups operate on active amplification with 10K DC resistance, delivering consistent gain and clarity across your entire dynamic range—essential for high-gain applications where note definition matters as much as sustain, night after night.

Installation & Gig-Ready Design

The solderless connectivity and included 5-wire plus ground and battery configuration eliminate traditional soldering, making swaps and troubleshooting fast in the rehearsal space or green room. Each pickup includes its own push-pull potentiometer for mode switching, plus two standard tone controls, letting you dial single and dual-coil tones on the fly without additional circuit modifications—perfect for adapting your sound across different venues and setlists.

Key Features

Active Humbucker Set with selectable single and dual-coil modes
HH configuration (Humbucker/Humbucker)
Bridge pickup: Alnico/Ceramic magnet construction
Neck pickup: Alnico/Steel magnet construction
10K DC resistance
5-wire plus ground and battery conductors
Solderless connectivity with included wiring harness
Push-pull potentiometer included for each pickup
Two standard tone controls included
Covered humbucker design with chrome finish
1.1" thickness (standard humbucker depth)
6-string configuration

This set represents EMG's refined approach to versatile high-output tone—mode-switching capability, solderless installation, and road-tested magnet pairing combine to give your instrument both immediate reliability and real tonal range for any stage.

Best suited for	Metal, Hard Rock, Progressive, High-gain Soloing
Tonal character	Aggressive output, tight low end, articulate cleans, high-gain clarity, dual-coil punch
Less specialized for	Jazz, Blues, Country (it will do it; instruments voiced for that style do it more easily)
Skill level	Intermediate / Advanced / Professional