EMG JCS Active Bass Pickup Set in White
Share
- Brand new in original box
- Full EMG manufacturer's warranty
- Free shipping in the continental US
In stock
- SKU
- EMG4993
Description
EMG JCS Active Bass Pickup Set in White
The EMG JCS delivers the articulate, punchy response that defines modern active bass tone. This set pairs a focused neck pickup with a powerful bridge pickup, engineered for clarity across the frequency spectrum and minimal noise in studio and live settings. Built for players who demand precision and consistency from their electronics.
Tone & Electronics
The JCS design balances articulation with low-end authority, with a 3.20 kHz resonant frequency that emphasizes note definition. Bridge output reaches 4.50V for aggressive tonal shaping, while the neck pickup delivers 1.00V for warm, controlled fundamentals. The active circuit operates on a single 9-Volt battery with exceptional efficiency—3000 hours battery life and only 80 microamps current draw mean extended play sessions between changes. Output noise of -99 dB at 60 Hz ensures virtually silent operation, critical for sensitive recording and low-volume work.
Installation & Compatibility
The solderless install system streamlines setup with pre-assembled controls and integrated routing. Neck and bridge pickups measure 91.19mm × 18.54mm and 93.99mm × 18.54mm respectively, fitting standard 4-string bass cavities, with a maximum string width recommendation of 69.2mm (2.725"). The kit includes two 25k volume controls, one 25k tone control, battery bus, stereo output jack, mounting hardware, and connecting cables—everything needed for a clean installation.
Key Features
- Resonant Frequency: 3.20 kHz for focused midrange articulation
- Bridge Pickup Output: 4.50V for dynamic tonal range
- Neck Pickup Output: 1.00V for warm, controlled response
- Output Noise: -99 dB at 60 Hz for silent operation
- Active operation powered by single 9-Volt battery
- Battery Life: 3000 hours at 80 microamps draw
- Output Impedance: 10 kΩ
- Maximum Supply Voltage: 27V DC for headroom
- Ceramic and steel magnet construction
- Neck Pickup: 91.19mm (3.59") × 18.54mm (0.73")
- Bridge Pickup: 93.99mm (3.70") × 18.54mm (0.73")
- Solderless install system with integrated controls and wiring harness
- Maximum recommended string width: 69.2mm (2.725")
The EMG JCS in white combines studio-grade noise performance with straightforward installation, delivering the precision and output consistency expected from EMG's active electronics.
More Information
| Condition | New |
|---|
Reviews
At a Glance
The EMG JCS is an active bass pickup set engineered for articulate, punchy tone with a tight low end and minimal noise—built for players serious about modern funk, studio sessions, and live performance. The bridge pickup cranks 4.50V output for aggressive tonal shaping, while the neck delivers warm fundamentals at 1.00V; the active circuit runs 3000 hours on a single 9V battery with virtually silent operation (-99 dB). A solderless install system and complete wiring harness make setup straightforward, so you can get precision electronics in your bass without the headache.
Who This Is For
| Best suited for | Studio Sessions, Home Recording, Live Performance, Funk |
|---|---|
| Tonal character | Articulate, punchy, tight low end, high output, minimal noise |
| Less specialized for | Folk, Jazz (it will do it; instruments voiced for that style do it more easily) |
| Skill level | Intermediate / Advanced / Professional |
Frequently Asked Questions
What does the solderless install system include?
The kit includes two 25k volume controls, one 25k tone control, battery bus, stereo output jack, mounting hardware, and connecting cables—everything needed for installation without soldering. The pre-assembled controls and integrated routing streamline setup.
How long does the 9V battery last?
The active circuit achieves 3000 hours of battery life at 80 microamps current draw, meaning extended play sessions between battery changes.
Will these pickups work in my bass?
The neck pickup is 91.19mm × 18.54mm and the bridge is 93.99mm × 18.54mm, fitting standard 4-string bass cavities with a maximum recommended string width of 69.2mm (2.725 inches). Check your bass cavity dimensions against these specs.
Why is the output noise spec important?
An output noise rating of -99 dB at 60 Hz means virtually silent operation, critical for sensitive recording environments and low-volume work where hum and hiss would otherwise color your tone.
How do the neck and bridge pickups differ in output?
The bridge pickup delivers 4.50V for aggressive, dynamic tonal shaping, while the neck pickup outputs 1.00V for warm, controlled fundamentals. This asymmetry gives you clarity on both positions while maintaining articulation across the frequency spectrum.
Do I pay sales tax on this order?
Sales tax is collected only on orders shipped to California; orders shipped to any other US state are not charged sales tax at checkout when you buy direct from our website. At a typical 7% rate that is an estimated $14 less at checkout than the same listed price on a marketplace, which collects sales tax as the facilitator in most states. Buyers remain responsible for any use tax their state applies. Free US shipping and 30-day returns are included.
Compare With
Similar Gear
Complete the Rig
Gear that pairs well with this.
✨ For You
Based on what you've been looking at.