EMG JX System Active Bass Pickup Set in Black
Share
- Brand new in original box
- Full EMG manufacturer's warranty
- Free shipping in the continental US
In stock
- SKU
- EMG3674
Description
EMG JX System Active Bass Pickup Set in Black
The EMG JX System delivers articulate, punchy single-coil J bass tones with the reliability of active electronics and solderless installation. These ceramic-magnet pickups offer clarity and definition across the frequency spectrum, making them a trusted choice for working bassists who need precision in their signal chain without the installation downtime.
Active Electronics & Output Performance
Powered by a single 9V battery with an impressive 3,000-hour lifespan, the JX System generates 2.00V output in normal playing and peaks at 8.00V with aggressive thumb technique, giving you dynamic range without noise floor issues. The -105 dBV noise floor at 60Hz and 2 kohm output impedance ensure clean signal transmission to your amp or interface—critical for live gigs where your tone needs to cut through and stay stable.
Design & Installation
Bridge and neck pickups arrive pre-wired with solderless connections, eliminating the need for a soldering iron; the set includes dual 25kΩ volume potentiometers, a 25kΩ tone potentiometer, output jack, battery clip, and adjustment screws for quick setup. Made in USA from ceramic magnets with black finish, these pickups integrate seamlessly into existing J bass wiring schemes and get you back on stage fast.
Key Features
- Set of active single-coil J bass pickups (bridge and neck positions)
- Ceramic magnet construction
- Made in USA
- Solderless wiring kit included with all connections pre-assembled
- Output voltage: 2.00V (finger/thumb), 8.00V (thump)
- Output noise: -105 dBV at 60Hz
- Resonant frequency: 4.05kHz; Output impedance: 2 kohms
- Battery-powered: 80µA at 9V; 3,000-hour battery life; maximum supply 27V DC
- Includes 2× 25kΩ volume potentiometers and 1× 25kΩ tone potentiometer
- Includes output jack, battery clip, and adjustment screws
- 4-string dimensions: Neck 91.19mm × 18.54mm; Bridge 93.99mm × 18.54mm
- Black finish
The EMG JX System combines articulate single-coil character with active circuitry stability and factory-assembled convenience for touring bassists and working musicians who need reliability and speed on every stage.
More Information
| Condition | New |
|---|
Reviews
At a Glance
The EMG JX System is an active single-coil J bass pickup set that delivers articulate, punchy tones with a crystal-clear high-mid presence—ideal for funk, jazz, and studio work where definition matters. Built in the USA with ceramic magnets and solderless wiring, it installs without a soldering iron, making it perfect for players who want pro-level tone and reliability without the installation complexity. Choose it for dynamic range, a low noise floor, and the precision signal that locks into a tight rhythm section.
Who This Is For
Great for
- ✓ funk
- ✓ jazz
- ✓ studio sessions
- ✓ home recording
Not the best pick for
- – thrash metal
- – drop tunings
Skill level: Beginner · Intermediate · Advanced · Professional
Frequently Asked Questions
Do I need to solder these pickups in, or is installation simple?
No soldering required—the JX System arrives fully pre-wired with solderless connections. The set includes dual 25kΩ volume potentiometers, a 25kΩ tone potentiometer, output jack, battery clip, and adjustment screws, so you can wire it into a standard J bass in minutes.
What kind of tone character do these pickups have?
The JX System delivers articulate, punchy single-coil J bass tones with clear high-mids and excellent definition. Active electronics keep the noise floor extremely low (-105 dBV at 60Hz), so you get dynamic range and precision without hum or hiss, making them ideal for funk, jazz, and studio sessions.
How long does the battery last, and what output levels should I expect?
The 9V battery lasts approximately 3,000 hours of playing time. Normal finger and thumb playing outputs 2.00V, while aggressive thump technique peaks at 8.00V, giving you plenty of dynamic headroom without clipping or noise issues.
Are these pickups suitable for metal or drop-tuned basses?
No—the JX System is designed for articulate, defined tones and is best suited to funk, jazz, and studio work. For thrash metal or heavily dropped tunings, you'll want pickups voiced for more aggressive, compressed character.
What skill level do I need to install and use these pickups?
The solderless design makes installation accessible to beginner and intermediate players, while the active circuitry and low noise floor appeal to advanced and professional users recording in the studio or gigging live.
Do I pay sales tax on this order?
We collect sales tax only on orders shipped to California. Orders shipped to any other US state are charged $0 sales tax at checkout when you buy direct from our website. On this item that is roughly $16 less out the door than the same listed price at a national retailer or on a marketplace. Marketplaces such as eBay, Reverb and Amazon collect sales tax in nearly every state as marketplace facilitators no matter who the seller is, so the same item at the same price costs less bought direct. Free US shipping and 30-day returns are included. Some states ask buyers to self-report use tax on out-of-state purchases.
Compare With
Similar Gear
Complete the Rig
Gear that pairs well with this.
✨ For You
Based on what you've been looking at.