Laney DIGBETH Series 200 W Bass amplifier head
Share
In stock
- SKU
- DB200H
. Description
Laney DB200H 200W Tube/FET Hybrid Bass Head
The DB200H is a compact yet powerful bass amplifier head that balances modern solid-state reliability with the warmth of tube circuitry. Its lightweight 4.1kg chassis makes it genuinely portable without sacrificing the 200W of headroom needed for live venues and studio work. The dual-channel architecture—combining FET and tube preamp sections—gives you tonal flexibility that ranges from clean, punchy definition to thick, overdriven saturation.
Tone & Electronics
The hybrid preamp design lets you blend FET and tube character on demand via the FET/tube switch, while independent volume controls for each section allow precise gain staging. Four selectable EQ curves plus a Tilt control and dedicated mid control give you surgical tone-shaping capability without menu diving, making it straightforward to dial in your sound whether running clean or pushing the tube drive hard.
Connectivity & Design
Multiple I/O options keep the DB200H at home in any rig: parallel 1/4" and 1/8" stereo aux inputs, a full FX loop with separate send and return jacks, balanced XLR D.I. output (switchable pre/post), and a headphone jack for silent practice. The ground lift switch eliminates hum in mixed systems, while the compact 180 x 300 x 210mm footprint fits easily into bass rigs alongside your cabinet without eating up floorspace.
Key Features
- 200W RMS power output
- Dual preamp section: FET + Tube hybrid design
- 4-position pre-selected EQ curves with Tilt control
- FET volume, tube drive, and tube volume controls
- Dedicated mid control
- 1/4" instrument input and 1/8" stereo auxiliary input
- 1/4" jack FX loop (send and return)
- XLR D.I. output with pre/post switch
- 1/4" headphone jack output
- Speaker Combi socket
- Ground lift switch
- Dimensions: 180 x 300 x 210mm; Weight: 4.1kg
The DB200H delivers serious amplification in a format that respects both your back and your tone.
More Information
| Condition | New |
|---|---|
| Country of Manufacture | China |
Reviews
At a Glance
The Laney DB200H is a 200W tube/FET hybrid bass head that delivers warm tube character and punchy FET definition in a lightweight 4.1kg package built for the road and stage. Gigging bassists get surgical EQ shaping, dual-channel tonal flexibility from clean to thick overdrive, and genuine portability without sacrificing headroom for live venues. Choose it for a amp that won't wear you out hauling to gigs but gives you the tone-shaping control and reliability needed for touring and session work.
Who This Is For
Great for
- ✓ Live Performance
- ✓ Studio Sessions
- ✓ Gigging
- ✓ Touring
Not the best pick for
- – Practice
- – Home Recording (bedroom-level)
Skill level: Intermediate · Advanced · Professional
Frequently Asked Questions
What's the difference between the FET and tube sections, and when would I use each?
The FET preamp delivers clean, punchy definition ideal for slap and modern bass styles, while the tube section adds warmth and can be driven hard for thick, overdriven saturation. Independent volume controls let you blend both channels or switch between them on the fly to shape your tone from session to session or song to song.
Is the DB200H powerful enough for live venues without a rack setup?
Yes—200W RMS into an 8-ohm cabinet provides serious headroom for most live and studio applications. The compact 4.1kg chassis and 180 x 300 x 210mm footprint make it genuinely portable, so you can go from bedroom to tour van without a full rack rig.
Can I record directly into my interface without a cabinet?
Yes—the balanced XLR D.I. output is switchable between pre- and post-EQ, so you can record the tone-shaped signal or grab a clean feed straight to your interface. A 1/4-inch headphone jack also lets you monitor during silent practice or recording sessions.
What EQ options does the DB200H have?
Four selectable pre-set EQ curves plus a Tilt control and a dedicated mid control give you surgical shaping without menu diving. This straightforward layout keeps you focused on playing rather than digging through settings.
Does the amp include a FX loop, and is it useful for live use?
Yes—it has a full 1/4-inch FX loop with separate send and return jacks, allowing you to insert effects like compression or reverb in the signal path. A ground lift switch eliminates hum in mixed systems, making integration with venue or studio gear straightforward.
Do I pay sales tax on this order?
We collect sales tax only on orders shipped to California. Orders shipped to any other US state are charged $0 sales tax at checkout when you buy direct from our website. On this item that is roughly $48 less out the door than the same listed price at a national retailer or on a marketplace. Marketplaces such as eBay, Reverb and Amazon collect sales tax in nearly every state as marketplace facilitators no matter who the seller is, so the same item at the same price costs less bought direct. Free US shipping and 30-day returns are included. Some states ask buyers to self-report use tax on out-of-state purchases.
Compare With
Similar Gear
Complete the Rig
Gear that pairs well with this.
✨ For You
Based on what you've been looking at.